Atma Xplorer

Xploring Games, Computing, Photography

Can my PSP have custom firmware installed?

I’ve been receiving tons of questions on how to check if their PSP can have custom firmware installed.  Here’s a complete and concise guide to get you going.  Make sure to read through the guide fully since it will answer all your psp motherboard related questions. First of, you need to understand that there are three types of PSPs:

  1. 1000 Series (Also known as PSP Phat/Fat)
  2. 2000 Series (Also known as PSP Slim or Lite & Slim)
  3. 3000 Series (Also known as PSP Brite)

So why install Custom Firmware on a PSP?

People install Custom Firmware so they can run Homebrew, programs developed by people that don’t have a contract with Sony. A PSP with Custom Firmware could also back up your games from the UMD to your computer; it also allows you to play those backups from your Memory Stick (MS). You could also do some serious customizations to your theme. Basically, you free your PSP from the hands of Sony.

Can I install Custom Firmware?

Before anything, you should know that there three ways to classify Sony’s PSP.  Hardware, motherboard and Hackability.

Hardware:

To date, these are the hardware models of the PSP

  • PSP 1000 or the PSP Phat
  • PSP 2000 or the PSP Slim
  • PSP 3000 or the PSP Brite
  • And last but not the least, the PSP Go

Motherboards:

Each hardware model of the PSP change motherboards over time.  However, this classification is only important for the PSP-2000 Slims.  Why?  I’ll tell you that in a bit.  The PSP Slim has 6 motherboard versions but we’ll focus on what’s important so I’ve split them into just 3.

  • 1st generation PSP Slims: pre-TA-085XX motherboards
  • 2nd generation PSP Slims:  TA-088v3 motherboards
  • 3rd generation PSP Slims: TA-090v1 motherboards

Hackability

The hackability of your PSP [in simple terms, can you put CFW on your PSP] depends on several factors.  I’ve made a list so you can easily classify things:

  • PSP-1000s are completely hackable.
  • 1st and 3rd generation PSP-2000s are completely hackable.
  • 2nd generation PSP-2000s and PSP-3000s are partially hackable

What does completely hackable and partially hackable mean?

A completely hackable PSP means that you can have custom firmware PERMANENTLY installed on it.  This means that the custom firmware stay on your PSP until you decide to remove it.

A partially hackable PSP means that it’s custom firmware is only temporarily loaded via a special exploit called the Chickhen hack.  If you shut down your system or had it turned off, you need to load the custom firmware again.

What will prevent me from hacking my PSP?

There’s several factors that will stop you from installing custom firmware.  Here’s a run down:

  • A 2nd generation PSP-2000 with firmware ABOVE 5.03
  • A PSP-3000 with firmware ABOVE 5.03

Why version 5.03?  Because 5.03 is the only firmware version that supports the Chickhen hack.  Firmware versions succeeding it (5.50, 5.51 and 6.00) have this exploit patched.

Is my PSP Hackable?

This is the simplest method out there.  You can check things manually but this is the recommended method:

Requirements:

Install chickHen R2Before you proceed, you need to install and successfully run the chickHen hack. Read the guide and come back here to finish the installation.

Instructions:

  • Connect your PSP to the computer in USB Mode when you have loaded ChickHEN R2.
  • Extract the file to your computer
  • Copy the PSPident folder to your X:GAME/GAME3XX folder
  • Disconnect your PSP
  • Run PSPident
  • If you did it right, you should have this screen pop out

PSP Ident

With that information, you can compare it to the table below to see if your PSP is hackable.

Hit for the Full version

Manually Checking your PSPs hackability

If you want to do things manually.  Follow this guide:

  1. What is the Firmware the PSP came with?

  2. The original firmware that came with the PSP right out of the box is an indication of its Motherboard, & here’s the list: If you’ve bought a PSP with Official Firmware higher than 4.01, chances are it doesn’t support Custom Firmware, any attempt to install it will be met with a Game could not be started error. Note: If you updated the PSP or the PSP you’ve bought has been upgraded before you got your hands on it then you need to find out what was the first firmware installed on it as the list above only applies to said version.

  3. What is the PSP’s Serial Number?

  4. The Serial Number is found on a label where the battery is supposed to go. Refer to the picture below for a better illustration: PSP Serial Note that this applies to Piano Piano Black PSPs (for now). If the serial starts with HU2, then the PSP most likely has a TA-088v3 Motherboard. Any other serial (Say starting with HC or HB or HJ) can have CFW installed.

  5. What’s is the PSP’s Identification Letter

  6. It’s the letter on a label on the box that indicates the version of the unit. A picture is shown below: Note that this label is only present on the normal PSP box and not those large “Limited Edition” ones. PSP Serial Anyways, See the G there?

    PSP-2000 CW 100v G

    That G is the letter in question. Here’s a list of all the letters that the 2000 series ship with:

    (No Letter) = 3.60
    A = 3.71
    B = Doesn’t exist
    C = 3.72
    D = Doesn’t exist
    E = 3.80
    F = 3.90
    G = 3.95 (TA-088v1) / 4.01 (TA-088v2) / 4.01 (TA-088v3)
    If the letter is absent or is from A to F, then you can install Custom Firmware. If it’s a G then you can’t.

  7. What’s the Box’s Serial Number?

  8. If your box doesn’t have a label with a letter in it, like the G in the third method, then it should have a label with another serial that’s not related to the PSP unit. PSP Serial Note that American 2000 series (2001 PSPs) & Japanese PSPs (Both 1000 series & 2000 series) Don’t have those date codes on them, just like the 2001 Piano Black PSP pictured above. The 2000 Series Date Codes go as follows:
    7C: Supported by cfw
    7D: Supported by cfw
    7(Any later Letter): Supported by cfw
    8A: Supported by cfw
    8B: Supported by cfw
    8C: very high chance it's not supported by cfw
    8D: Not supported by cfw

How can I install custom firmware on my PSP?

If you have a completely hackable PSP (please read the guide again if you don’t know what a completely hackable PSP is) then you just need to follow the basic installation guide:

If you do have a PSP-3000s and PSP-2000 with TA-088v3 or any PSP above 5.50 OFW then you’re in luck.  You can still enjoy games and homebrew on your PSP by installing any of the following Hen + ISO loader combo:

These are compatible with ALL PSP models so you can install 5.03 GEN-C, 6.20 TN-E or 6.35 PRO-B5 regardless of your PSP unit.  At the moment, all available firmwares for the PSP are hackable except 6.37 and 6.38 so please don’t update to that.  Read this for further information about 6.37 OFW, 6.38.

Now, if you’re still not sure how to proceed, ask a friend who’s familiar with Custom Firmwares to check for you. If you have a suggestion or a question, just post a comment.

Tags: , , ,

Comments ( 365 )

Have Something To Say ?

  1. orasngkatahimikan kiel April 10, 2009 Reply

    can the ta-088v3 motherboard be hacked soon? i just bought a psp-2006 & i tried to upgrade it to version 5.00-m33, but it just cant install the upgrade, now i still cant use my psp.. what should i do?

  2. jeizky9999 allen April 15, 2009 Reply

    ok, so I got a limited edition Madden 09 4.01 OFW, so your saying I should just give up on not having a CFW in order to play psx games? please reply, your answers are greatly appreciated ^^,

  3. pelio_e pelio April 19, 2009 Reply

    My PSP is a Brite one. However, the serial code found at the battery storage starts with HU. Is the CFW possibly installed in it? Another thing, is that true if the UMD game Idol Master, if you update the version of it (5.05) is it possible for hacking?

  4. atmaxplorer sylv3rblade April 20, 2009 Reply

    The PSP brite is still not supported by CFW. It’s on the guide.

  5. axemogulkahn11 kevin April 22, 2009 Reply

    how to upgrade my psp to 5.00… I have only 3.80 on my psp … my psp is slim…

    • atmaxplorer sylv3rblade April 22, 2009 Reply

      read the guide first to see if your psp slim is cfw compatible. I’ll be posting a ofw to cfw guide soon.

  6. jeestyle Nemanja Nenadic April 26, 2009 Reply

    Hi Sylv3rblade,
    first, thank you very much for this blog post!

    Second, I’m a bit confused. Few days ago I bought a PSP Slim and after reading your post I’m still not sure if I can use CFW.

    It came with 3.95 firmware (yay!),
    serial number starts with “HC” (yay!),
    PSP’s identification letter is “G” (boo!).

    So I have 2 yes and one no CFW. Can I install a CFW? o_O

    Thanks in advance!

  7. jeestyle Nemanja Nenadic April 26, 2009 Reply

    I also forgot to mention that I’m from Europe so there might be some difference in serial numbers etc. And the model is “PSP-2004 PB”

  8. phemeralz_je Rap May 1, 2009 Reply

    hey… why does my serial no. starts with HE?(what does this indicate?)….. you said psp with motherboard TA-088v3 version are not hackable? is there a time that it will be? because i have a PSP-2006 PB with a system info. of version 4.01… i dont hav cfw. and the identification letter is “G”. im from philippines btw.

  9. jason194123 jason May 30, 2009 Reply

    i have a star wars psp would it work on that?

  10. gbfxgh nanayboi June 5, 2009 Reply

    how do u tell what vesion?

    • atmaxplorer sylv3rblade June 7, 2009 Reply

      on your XMB:
      System Settings > System Information

  11. gweezy_ Luis Garfias June 5, 2009 Reply

    I have been looking everywhere and i need to find out what motherboard my psp slim darth vader is and thank you so much.

  12. PSP4_01M33_2 PSP_$BLING_$ June 11, 2009 Reply

    Thanks. I now know my PSP is hackable cos of date code. Mine’s 7D

  13. omafly Pspdude June 12, 2009 Reply

    When i took off my battery it started with YC does that mean that my psp ´can have custom firmware?

  14. t04siochi 6libog9 June 18, 2009 Reply

    what if your serial number starts with HE ?

  15. spurohit pspnwb June 22, 2009 Reply

    I am getting a message” IPL inject failed.” there is not enough sector to inject IPL the pandora will not boot PSP. do you want to continue. Y/N” when I click on N it still writes to the memory stick. any help and/or suggestion is appreciated.

    I am using a 2GB microSDHC with a MSPD adapter

  16. Bhaiterror Yogesh June 25, 2009 Reply

    I have bought PSP 4.01

    PSP-2004-IS
    220-240V
    G

    date code is 8c

    serial # is hc8******

    made in china

    can i play Games from memory card??

  17. spurohit pspnwb June 25, 2009 Reply

    update could install CFW using rains ultra using DC8v on a 2GB micrSDHC with a MSPD adapter

  18. ton_20_yap pspnoob June 28, 2009 Reply

    mr sylv3rblade, what about the limited edition of the ratchet and clank?it has a serial number of HU1………. and it has no date code. can this psp3000 can play games on mem stick using a CFW? tnxü

  19. spurohit pspnwb June 29, 2009 Reply

    you should look into chickHEN R2 for psp3000

  20. ze ze July 9, 2009 Reply

    good guide mate. made me confirm some things about purchasing a psp. Also, if you already have a psp and want to be completely clear on what motherboard you have I suggest using PSPident while in ChickHenR2 mode. works like a charm, unharmable (5.03 only)

  21. fostynike2007 Foster July 22, 2009 Reply

    I have a PSP 1004 and i just recently installed sony official firmware 5.50 so i want to know if i can install custom firmware pls.

  22. halocounter halocounter July 27, 2009 Reply

    Erm…got a question..
    Bought my PSP in China some time ago..
    Its a Slim and Lite PSP..
    It says :

    PSP-2006

    Serial-No: HExxxxxxxx

    and there is NO date code WTF ?

    So can i install CF or not ?

    Thanks for help =)

  23. imdiljeet dj July 30, 2009 Reply

    h i my psp 3000 is limited edition it came with rockband bundle can i hack it?

  24. pdrezzy pdrezzy August 2, 2009 Reply

    my phat psp has a SU serial number can it have cfw

  25. ak47bari akbar August 2, 2009 Reply

    the link for making the mms is only 100 bytes and when i open the page it says to go to http://www.megaupload.com/?d=NA2B19F6 but that dosnt work. PLEASE HELP!!!!!!!!!!

  26. arkknight only me August 2, 2009 Reply

    i hav a question! i hav a slim w/serial number HUOxxxxx can it hav cfw

  27. ajace_ajace 4ppl3j4ckz August 5, 2009 Reply

    i got a question…will cfw work if my serial # is HU3 and u said ” If the serial starts with HU2, then the PSP most likely has a TA-088v3 Motherboard.”…but then u said “Any other serial (Say starting with HC or HB or HJ) can have CFW installed.”….from this info my serial # is not HU2 but its not a HC or HB or HJ…
    plz email me ur [email protected]

    • ajace_ajace 4ppl3j4ckz August 5, 2009 Reply

      i also have to add that i dont have the boxes and stuff anymore so i have to work with the psp…

  28. sergs.lluisma sergz August 5, 2009 Reply

    help me please.. im newbie in psp.. my previous firmware is 4.01 m33.. and i searched to the internet to search for firmwares.. and i updated to 5.52 from the official sony site.. after i updated it my cso/iso games cannot be read.. how can i go back or downgrade my version psp?? i want the custom firmware.. please help.. thanks..

  29. krysta_salera Rio August 9, 2009 Reply

    hey anyone know if the star wars battlefront ceramic white slim is CFW allowed? because i got everything like the chickHEN and the 503 GEN A on the psp everything works except the last part of the GEN A …. which is reboot …. it keeps turning off.

    thanks
    email: [email protected]

  30. krysta_salera Rio August 9, 2009 Reply

    also to add its psp 2001 and serial # HU7616559

    from what i understand in the compatibility thread that it should be unless im mistaken.

    thanks for the ideas on my problem!

  31. soryfoo94 blink182kid August 9, 2009 Reply

    i have a psp 2001 slim with serial Hu2 with official firmware 5.51. can i use chickHEN or no?and can i put custom firmware?

  32. tall-gye michael August 9, 2009 Reply

    hey all im new at this hacking psp stuff i got a psp-1002 and a sony battery (came with it) is this able to be hacked without a pandora battery???

    • atmaxplorer sylv3rblade August 9, 2009 Reply

      Depends on your firmware, if you have 5.03 and below, you can install CFW w/o pandora.

      • tall-gye michael August 9, 2009 Reply

        how do i get 5.03 without pandora im version 5.51 stupid me

        • atmaxplorer sylv3rblade August 9, 2009

          You can’t. There’s no way to downgrade a PSP with 5.51 firmware without using Pandora.

        • tall-gye mhall165 August 9, 2009

          so ill need a pandora battery any way

  33. yasantha1234.gtr dittocrazy August 11, 2009 Reply

    i have psp with a 3.95 ofw i want to install a 4.01m33 cfw .can u help me

  34. angel_boy32 GHAZI August 17, 2009 Reply

    i have a psp 2003 PB slim and lite.i have upgraded to official sony firmware 5.02 . now i want to get a custom firmware. . my serial number is HB*******. and the date code is “8C”. . how can i install custom firmware in it.. plz help me..

  35. johnsmiled David August 22, 2009 Reply

    Hey i got a question.
    I have a psp that i took to taiwan to get something done in it.
    But i dont know what they did to it.
    I can download games and everything.
    But i cant seem to update my psp from the online update button thingy.
    My psp serial number is
    “FU******* 6B”
    Is it able to have CFW installed?

  36. harrish.hk73 harrish August 23, 2009 Reply

    hi , i have a psp 2006 ver 5.51 …. how can i downgrade it so as to play games

  37. tommysbricks tommy August 24, 2009 Reply

    hi got my psp of sister bricked its a fat psp model psp-1004
    serial sc1573700
    date code is 5c
    dont no firmware installed have tried pandora battery an memory stick only the power light turns on nothing else doesnt boot was directed to here to find out more could u help plz

  38. tommysbricks tommy August 24, 2009 Reply

    hi psp-1004
    serial sc15*****
    date code 5c
    psp 3 yrs old fhat version can cfw be installed
    only power light comes on have tried battery an memory stick ?
    look forward to your reply and ty in advance

  39. demon3313 Lee August 25, 2009 Reply

    look i got a 3000 series version 5.02 can it b hacked??

    • atmaxplorer sylv3rblade August 29, 2009 Reply

      Yep. Just upgrade to 5.03 (don’t use the network update) and install chickhen. It’s written on the guide :D.

  40. blooboykilla15 Neil August 29, 2009 Reply

    i have a serial number starting with HC.
    that gave me hope.
    but my box has a G.
    my date code is 8C.
    and my PSP is 2004 with firmware 4.01.
    i’m so scared of trying out some methods.
    because of the BRICK thing.
    so can you help me out?
    can my PSP be supported by CFW?

  41. blooboykilla15 Neil August 29, 2009 Reply

    and also the guide is very confusing.
    it said that the TA-088v3 mobo can now support CFW.
    but if you read on it says that TA-088v3 cannot be supported by CFW.
    i really don’t get your guide.
    it’s so confusing.
    HELP!

    • atmaxplorer sylv3rblade August 29, 2009 Reply

      I think it’s the image that’s causing the problem. I’ll try to update… but to clear things up. Yes, PSPs with TA-088v3 motherboards can now have custom firmware.

      This part:

      Update: PSP-3000s and TA-088v3 – equipped PSP-2000s can now install custom firmware. How? Via the chickHEN hack

      Should take you where you want to go.

      • blooboykilla15 Neil September 2, 2009 Reply

        thanks so much.
        now i can play ISO games.
        but i downloaded a different cfwenabler.
        i downloaded 3.51 ‘coz 3.50 doesn’t work.
        now my OFW 4.01 is now 5.03 MHU.
        anyway super thanks for the guide^^
        more power!:D

        • atmaxplorer sylv3rblade September 2, 2009

          I’ll edit the post for cfwenabler to include multiple versions of it. 😀 Congrats 😀

  42. C.kampun Charles August 30, 2009 Reply

    Dear sir,
    By accidentially and big mistake,my friend installed the Official Firmware version 5.02 to my PSP-2000 SLIM. Before I use the Cracked Firmware version 3.90 that I can play ISO, CSO game files from Memory Stick. But after my friend installed the Officially Firmware version 5.02 ,I can’t play play ISO, CSO game files from Memory Stick anymore.
    Could you please give me your suggestion with the full detailed methods to solve my big problem.
    Your Sincerely,
    c.kampun 🙁

  43. tommysbricks tommy August 31, 2009 Reply

    hi again was wondering if u could help me with my psp i have posted but no reply?
    my psp is a psp-1004 fat one
    serial sc15*****
    date code 5c
    psp 3 yrs old fhat version can cfw be installed
    only power light comes on have tried battery an memory stick ?

    • atmaxplorer sylv3rblade August 31, 2009 Reply

      Sounds like you have a permanent brick right there. It’s a phat, it can have custom firmware installed regardless of model but seeing as it’s condition is like that…

  44. chetasaurous chet September 2, 2009 Reply

    i have HU8995571 madden 09 psp i updated my psp before i even heard about CFW and i did try to hack my psp once but messed up, for some reason i downloaded a 5.00 m33 update it ran but it updated to OFW, can you tell me if my psp is hackable?

  45. otisadelbertsteiner Otis September 2, 2009 Reply

    Hi,
    I have a PSP Slim, and the serial behind the battery starts with HU0.

    The box does not have an identification letter or a date code, but it does have a serial number that starts with AB00.

    I am not sure if this a TA-088v3. If I use the chickHEN hack for TA-088v3, and the motherboard is NOT a TA-088v3, will it harm my PSP?

    • atmaxplorer sylv3rblade September 6, 2009 Reply

      No it won’t. It’s safe for you to use chickHen and the custom firmwares that run on it.

  46. vin.furlong vin f September 5, 2009 Reply

    I was just wondering, I have a slim lite 2003 serial HBxxxxx and date code 7c, All signs point to it as being moddable BUT, I have recently updated my official firmware to 5.51, Will this cause problems If I decide to go with a pandora and magick stick mod, or should it be ok?
    @sergz, I dont know why you updated from the official site, It seems that you had custom firmware already, The official firmware doesnt allow you to play modded games unfortunately, Hard luck dude, But if I get a positive answer to my question then Its just a matter of you getting a pandora bat and a magic stick, here. check this vid out for a better understanding of how it works.http://www.wonderhowto.com/how-to/video/how-to-hack-your-psp-without-cfw-261815/

  47. chetasaurous chet September 7, 2009 Reply

    can you please write back, mine starts with Hu8 madden 09 psp i updated my psp before i even heard about CFW and i did try to hack my psp once but messed up, for some reason i downloaded a 5.00 m33 update it ran but it updated to OFW, can you tell me if my psp is hackable

  48. modechaoz corix September 7, 2009 Reply

    WHY NOT TRY TO USE “PSPIDENT” TO IDENTIFY IF UR PSP IS HACKABLE…. JUST GOOGLE IT. AND COPY IT IN YOUR PSP/GAME FOLDER.. AND REFER TO THE DIAGRAM ABOVE FOR REFERENCE..
    @SLVBLADE – JUST TRYING TO HELP… THNX DUDE

  49. chetasaurous chet September 8, 2009 Reply

    plzz answer mine 🙁

  50. chetasaurous chet September 9, 2009 Reply

    can you please write back, mine starts with Hu8 madden 09 psp i updated my psp before i even heard about CFW and i did try to hack my psp once but messed up, for some reason i downloaded a 5.00 m33 update it ran but it updated to OFW, can you tell me if my psp is hackable 🙂

    • atmaxplorer sylv3rblade September 9, 2009 Reply

      Madden PSPs are hackable. Just make sure you don’t use the bundled memory stick to create a MMS. It won’t work.

      • chetasaurous chet September 10, 2009 Reply

        oh thank you, SO much! im so glad 🙂 now ima go buy a pandora bettery 🙂

  51. adnankhanred adnan September 10, 2009 Reply

    hi
    my brother downloaded ver5.03 in psp 2000 and it started to hang so he downloaded ver 5.51.he want to downgrade his version.pls help me out

  52. jersey.9 nikki benito September 10, 2009 Reply

    hi!
    i have psp 2000 and ive installed a ver of 5.51. how do i install and play iso games in the memory stick?
    Thank you very much for your assistance!

    • atmaxplorer sylv3rblade September 10, 2009 Reply

      If you have a hackable PSP (read the post to verify if you have that), it can be downgraded. Otherwise. no, there isn’t a way for you to play ISOs on your psp.

  53. krikil_devil ixyak September 10, 2009 Reply

    hi, i’m using PSP 2006, how can i play ISO/CSO game file on memory card?? please help me

  54. harrish.hk73 harrish September 11, 2009 Reply

    just visited singapore – sim lim square …. they told me psp 2006 ver 5.51 cannot be downgraded … instead they told me me to use cd which may contain 20 games for $s 90. They also told me that pandora battery is now not in market. Is it true.. Can any one tell me where i can get pandora battery and if can i downgrade it.

  55. rob_firemonkey rob September 14, 2009 Reply

    hi there can you help a bit confused
    psp model 2003
    box letter G
    date number 8B
    serial number HB

    can i have cfw installed

    • chetasaurous chet September 15, 2009 Reply

      HBwhat whats after that?

  56. rob_firemonkey rob September 15, 2009 Reply

    HB06

  57. akmaljohar AJ September 15, 2009 Reply

    Hi,
    My kids have 2 PSP SLim 2000 and we already hacked it with CFWenabler 3.60 and Chickhen.
    One of the PSP recently produce shaky display and response really slow. I also noticed when I connect to PC via USB it cannot read the whole content of the memory stick. Only certain part of it. I guess the memory stick is corrupt. When I do Master Reset the unit behave normally without shaking and slow response.
    Can I format the memory stick and copy from my other PSP memory stick to the newly format Mstick? Will it works?

  58. ricxace chad September 16, 2009 Reply

    my friend crash his psp fat while doing downgrade using hellcats, i heard that padoras batt. w/ mms can fix it. is that true?

  59. andy_taylor84 velias September 17, 2009 Reply

    Firstly thanks for the article 🙂

    From reading the guide it sounds like mine cannot have CFW installed?

    Mines a 2003 and referring to the guide it has the following:

    1. 4.01 Firmware
    2. Serial starts with HB
    3. Has a G on box

    I’d be tempted to put CFW if it is compatible as it would be nice to play my old PSX games 🙂 But I don’t want to brick my shiny new, old model, PSP.

  60. TRJ021782 TRJ021782 September 22, 2009 Reply

    Hi, I have a PSP 2001. I have discovered that my motherboard is a TA-088v1 and I currently have OFW sony 5.50 firmware installed (upgraded before I bought it) I want to go custom firware and I do not want to go Pandora can anyone help me?

  61. ralphdhandsom xraymetal September 28, 2009 Reply

    hey i dont know if its alright to put 5.50 on my psp slim (silver) would it brick it please tell me asap!:D
    thank you

    • ralphdhandsom xraymetal September 28, 2009 Reply

      also how do you know
      what version psp you have?
      thanks heaps

  62. chirori sillygirl September 28, 2009 Reply

    hi~ i used to have cfw on my psp (slim 2001) and made a stupid mistake and upgraded it to ofw 5.50. *cries*

    i’ve been trying to find a way to change it to a cfw again. is there a way to do it? 🙁

  63. ralphdhandsom xraymetal September 28, 2009 Reply

    lol woops haha
    uhh i got question does 5.50 work
    on chickHen hack?
    thanks heaps

  64. kelvin_vixens silvrbladenx8 September 28, 2009 Reply

    dj, you can’t, it’s 3000 so you can’t, srry

  65. ralphdhandsom xraymetal September 29, 2009 Reply

    hey thanks for that 🙂
    one more question i installed chickHen on
    my psp as you know i just wanna know why its laggy in some games not online (sinlgeplayer)
    thanks heaps
    xx

  66. muhammed_qsm STYLEzZ October 6, 2009 Reply

    Hi, my friend has mistakenly upgraded his psp-2000 to original FW 6.00..how can i downgrade it now and install 5.00m33.this is urgent so please reply ASAP

  67. spyke2 Duffy October 6, 2009 Reply

    Hi there,
    what about a psp2006, with ofw 4.01, letter “G” and the serial starts with HE2.
    In the tut it says G” no cfw, but it also say: G can be 4.01 (TA-088v2) or 4.01 (TA-088v3)
    If it is a “G” 4.01 (TA-088v2) is it hackable?
    If not, ignore the rest of the text.

    To find out what board is inside, install 5.03, Hen and run pspident. If it is a TA-088v2 is it possible to downgrade to older ofw/cfw?

  68. nickkhaw Nickkyboy October 15, 2009 Reply

    Hi,
    It’s been a long time i did not turn on my PSP slim. I remember the last firmware i up is 4.X M33. Till now i never upgrade so can i say i can install other CFW?

  69. ralphdhandsom xraymetal October 15, 2009 Reply

    hiii:)
    i have chickhen hack and i am dying to play
    2k10 i was just wondering if i can run it and also can i update the hack to 5.50 gen a or gen B?

    thank you:)

  70. whitmanronaldlee Ron Whitman October 15, 2009 Reply

    Hey sylv3rblade,
    Great info, the best I’ve found so far after 2 days of searching.
    I’m stuck though. I have a 2001 OFW 5.51. I want to run PSP Ident but I can’t install chickhenR2 due to my OFW. What to do?
    It is a “daxter promo” and the serial is HU315XXXX. Can you tell me if my psp is hackable?
    Thanks

    • atmaxplorer sylv3rblade October 15, 2009 Reply

      If it’s from the Daxter PSP Bundle Yes it’s hackable.

      • whitmanronaldlee Ron Whitman October 17, 2009 Reply

        Thank you sylv3rblade. I don’t know anyone with a pandora battery (which I need to make my own), so I suppose my next step is to order a pandora battery from the internet. Might as well order a preloaded memory stick while I’m at it. Your link for ordering is no longer valid. Any suggestions on which retailer is valid? Thanks again!

        • whitmanronaldlee Ron Whitman October 19, 2009

          Sorry about the false information on my last post. I do NOT need a pandora battery to make a pandora battery, only a modded psp. I’ve actually found a friend with a modded psp and I’m back on my mission! I’ll let you know how it works out!

        • atmaxplorer sylv3rblade October 19, 2009

          Be sure to post your experience here 🙂

  71. avandeguzman avan October 17, 2009 Reply

    hey…when i download it…it’s corrupted data…what will i do???

  72. avandeguzman avan October 17, 2009 Reply

    how can i know what motherboard i got???

  73. whitmanronaldlee Ron Whitman October 20, 2009 Reply

    Mr. Sylv3rblade, thanks to you I am currently running cfw 5.00 M33-4! Woo-Hoo! Saying that, I did have a few issues. First, trying to create a slim pandora battery on my friends modded phat psp. It was easy enough, just don’t let go of the battery during the process! Secondly, I was trying to be slick and put “pspgrader” on one memory stick and “pan3xx” on another. It worked well enough, but when I needed to convert my battery back from pandora, I had to locate and copy the “battery serial on file” from one memory stick to the other. It was also easy enough but I would not recommend it. My next project is to try and figure out UMDGEN. You wouldn’t happen to have written a post on that as well? Thanks again for your awesome tutorial!

    • whitmanronaldlee Ron Whitman October 21, 2009 Reply

      sylv3rblade, I updated my CFW from 5.00 M33-4 to 5.00 M33-6 to 5.50 GEN-A(Full) to 5.50 GEN-B(Full) to 5.50 GEN-B2(Full), but my system information only states 5.50 GEN-B(Full), not the B2. Is that right? By the way, I got that whole ISO, CSO and UMDGEN thing figured out. This is awesome, I should have modded a long time ago! Thanks!

      • atmaxplorer sylv3rblade October 21, 2009 Reply

        Don’t worry, that’s normal. Installing GEN-B2 will still display 5.50 GEN-B(full).
        Congrats on converting 😀

        • whitmanronaldlee Ron Whitman October 21, 2009

          Thanks for the “congrats”, definately could not have done it without your help. I also took your advice and did not flash up to CFW 5.50 GEN-C.
          When I used to run OFW, I would update the OFW through my home wireless router. Is it possible to update my CFW this way with CFW installed or do I just need to check out atmaxplorer ocassionally for the lastest CFW updates? Many thanks again.

        • atmaxplorer sylv3rblade October 21, 2009

          The GEN firmware doesn’t have the updater that the older, more loved M33 releases had so you have to check this site out for any further updates :D. You can subscribe by email if you want to 😀

        • whitmanronaldlee Ron Whitman October 22, 2009

          I’m already subscribed to this entry, how to subscribe to your e-mail? I looked around Atma Xplorer and couldn’t find a link. Sorry and thanks!

  74. mosehle Mzege October 21, 2009 Reply

    My OFW is 5.01 and I cn’t install chikenhen, please help.

  75. odlanyer_gemlab reymiyay October 21, 2009 Reply

    Hi sylv3rblade, just by reading your post, I idolized you already=) RESPECT!!! Anyways, as per your post above, I have a completely hackable psp (psp 2000, serial # HJ372…, and psp-2000 IS 100V G). BUT… unfortunately I upgraded it to ofw 5.5, my bad=( *cries* Can I still make use any of the custom firmwares?

    • atmaxplorer sylv3rblade October 21, 2009 Reply

      You need a pandora battery to downgrade. Either pony up some cash to buy one, ask a friend to downgrade your PSP or ask a shop to downgrade your PSP.

      • odlanyer_gemlab reymiyay October 21, 2009 Reply

        thanks! thanks!=) Guess, pandora’s bat is my last and only option. Btw, aprecciate your prompt response, and will spread the good news! LOL! Keep it up!!!

  76. greyz.greyz G October 22, 2009 Reply

    I have a question. completely at lost here. I’ve recently got a new psp slim 2006, blume series, and it said in the box it has an official firmware 5.03, it has the G in the box and it’s serial starts with HE37xxxxx. Can I install a cfw?

  77. pierredejager pierre October 23, 2009 Reply

    hi silv3rblade can you please help me i have a psp-3004 slim & lite piano black ver.4.21 and my serial starts with hc date code 8d and on the box i have the letter A haven’t put chickhen r2 on yet i have downloaded 503.pbp firmware to update my psp and also downloaded chickhen r2 just want to know can i put custom firmware on and witch guide must i use please help and reply

  78. riyazeth RyAaZ October 26, 2009 Reply

    I am planning to buy a psp 3004 with the letter C on its box, what frimware would this come with. if not what letters are now hackable for the 3000.

  79. ivanyaueasy harrislo October 28, 2009 Reply

    I have a PSP-1000 with official firmware 5.50 does this mean i cannot install custom firmware?

    • atmaxplorer sylv3rblade October 28, 2009 Reply

      You can, you just need a pandora battery to install CFW.

  80. guitar_freak10 psp noob?? November 4, 2009 Reply

    is there a custom firmware for psp 3000 with 5.50?

  81. Night500000 ray November 6, 2009 Reply

    If I was to buy a new psp now, what firmware would it have?

  82. snoopaloop520 nick macias November 6, 2009 Reply

    I have the psp god of war edition. The serial starts with hu8. cani pu cfw????

  83. abrashid46 rashid November 8, 2009 Reply

    i have bought a new psp 3004.
    i have updated it since i insert umd.
    now its showiny system information version 5.55.
    wht should i do?is its hackable?

  84. ami180 ami November 9, 2009 Reply

    hi i have just bought a psp 2003 the serial starts with hb and has a letter j on the box can i have cfw the ofw is 4.05 not updated it yet.
    thanks

    • atmaxplorer sylv3rblade November 9, 2009 Reply

      Yes you can install cfw on your PSP.

      • ami180 ami November 9, 2009 Reply

        will it be perminant cfw or that one where you have to keep doing if you switch off psp.
        how would i do it aswell
        thankyou for the quick reply

  85. banamailatin paxx November 9, 2009 Reply

    hi, i am working on my psp for 3 days but i cannot solve the problem of mine 🙁 it is psp 3001 and the serial starting with HU4****
    i try hundered times to install chickHEN but it is always CRASHES and shuts down 🙁 is there any way to install a cfw of not? can i use a pandora?? the big question is : is my psp is hackable or it will stand stucked to ofw forever?? i really need to install a cfw because i cannot find any umd games in my country…:(
    thank you for your interest…

    • atmaxplorer sylv3rblade November 9, 2009 Reply

      PSP-3000 = unhackable.
      What’s your current firmware version?

      • abrashid46 rashid November 10, 2009 Reply

        when i go to system information it has version only 5.55.
        is this version hacakable

      • banamailatin paxx November 10, 2009 Reply

        it is 5.03 ofw 🙁 but i cannot install ChickHEN 🙁 i really dont understand what is the problem 🙁

  86. superstarsarahs sarah0512 November 16, 2009 Reply

    hi i have a psp-1003 and the serial no starts with FB3 and the date code is 6B i think my batt has been converted but not 100% i would buy one so i knew it defo worked i dont have an iso folder i do have an 8gb mem card ( magic duo ) i should be able to play downloaded games on it shouldnt i ?????? if u can help it would be appreciated i know how to do anything ( almost lol ) with a ds and r4 card but have no clue with psp’s i have only had this one for a week if that thanks guys ! x

    • jmdaccess08 jmd November 18, 2009 Reply

      Try to follow the instructions, read carefully…im just like you who doesnt know much about all of this but somehow i manage to do all of this stuff by reading XD

      and btw your psp is 1000 series PHAT/FAT so follow the instructions above and youll be alright, (as long as you didnt update is to 6.00 i guess) Goodluck!

  87. jmdaccess08 jmd November 18, 2009 Reply

    Hi sylv3rblade, think it would be possible for you to make a guide of PSX2PSP, you know, playing PS1 games in PSP? None of the other site makes sense on their tutorials. but if you could teach us your way, we might understand it. Thanks

  88. jheysomciodacanay jhey November 23, 2009 Reply

    pls kindly help me, I upgrade my psp to 4.01 M33 to V5.0 but i didnt notice that it doesnt have M33. now i can not play any games. I’m trying to install the chicHen but after I open the Folder from the photo it automatically shuts down (not Rebooted). Im new here please help I really love my PSP and I dont have enough to buy the pandora battery.

    I have PSP 1004 and the version now is 5.0

    I will wait your email answer please help.

  89. orasngkatahimikan kiel November 24, 2009 Reply

    sylverblade… may details k b ng pspgo? qng anu ang diff nya s lumang psp at qng maha-hack b to? dba wla n umd un? panu ung gameS? NUN?

  90. danny_374 dan November 24, 2009 Reply

    my psp came with psp-1003 and version 2.0 or 2.01 had it 3 years what hack would best support my psp and play all games because at the moment it wont play the new lego indiana jones but will play vice city stories any ideas or suggestions ?

    • atmaxplorer sylv3rblade November 25, 2009 Reply

      You have a PSP-1000, it’s completely hackable.

  91. 622gray gray6 November 25, 2009 Reply

    Hi..need help here:-( i just bought psp20006 with serial# HE08xxxx with G on the box and 4.01 ofw..can i put cfw on my psp? Thanks 4 quick reply..

  92. orasngkatahimikan kiel November 25, 2009 Reply

    totoo bng may expiration ang games ng pspgo? prang rental lng un dba? totoo b un?

  93. darknessxiii DarknessXIII November 25, 2009 Reply

    Hi, cheers for your gd tut but i’m sort of in a big problem atm, the psp-2006 i’m working on does not have the box nor a date code. Currently it’s on ofw 5.03 with a serial of HE4…
    Would greatly appreciate it if u could give some insights to this problem of mine

  94. max_carnage_101 Max November 25, 2009 Reply

    I recntly bought a PSP 2003 second hand. I’m not sure what firmware it started with but its on 4.05 plus I don’t have a box. However the serial no. starts with HB and the date code is 7c. Can I install CFW?

  95. juanrvieira Juan November 25, 2009 Reply

    I have a PSP3000 Firmware V5.55
    Still unhackable???
    Thanks for the info…I’m reading you for days and I’ve just found that….

    • atmaxplorer sylv3rblade November 26, 2009 Reply

      Yes, it’s still unhackable unfortunately.

  96. allainevillanueva allaine November 26, 2009 Reply

    i have my psp 2006 and it doesnt have any date codes, how can i make sure if my psp can be installed the firmware? the version is 5.03….. thanx…

  97. allainevillanueva allaine November 26, 2009 Reply

    and also the serial no. of my psp starts with HE? so how about that?

  98. golastic Isaac November 26, 2009 Reply

    I know that for now but am also using 3001 with OFW 5.55 installed.Am waiting when solutions will pop up cuz i’ve started download my favourite already and ope the solutions will be available soon.
    Thx man for ur explaination

  99. unknown_player.10 lol November 27, 2009 Reply

    When I bought my psp, I check the the system software and it said 4.01 m33-2. Does that mean my psp is already a custom software?

  100. unknown_player.10 lol November 27, 2009 Reply

    Win!!!

  101. theodorejed19 theodorejed November 28, 2009 Reply

    hi! are imitation psp’s hackable??

  102. hell_n0 greatsage November 28, 2009 Reply

    it is possible to install cfw for psp 3004 but ofw 5.00?coz u said that psp 3000 still unhackable.and my psp date code is 8D..
    i just bought psp 2 days ago..really appreciates for your help.

  103. jessezaccagnini Jesse November 30, 2009 Reply

    Thanks for the Guide…. just to be sure, You CAN’T install Custom Firmware on a PSP 1000 on 5.50 Official Firmware ?

    • atmaxplorer sylv3rblade November 30, 2009 Reply

      You CAN ONLY install cfw on a PSP-1000 with 5.50 OFW with a Pandora Battery.

      • jessezaccagnini Jesse December 2, 2009 Reply

        Thankz 4 the reply, 1 more question… If I hardmod a Pandora Battery, I cant change it back to power the psp???

        • atmaxplorer sylv3rblade December 3, 2009

          You can. It’s written at the bottom of the guide 😀

  104. yapronald27 bryann December 6, 2009 Reply

    alo! anyone could help me. i have a 2006 model and had been already modified to 5.03 gen b(full) to a store but it’s already gone and back to original setting that cannot play downloaded games. i appreciate your help. pls . ty

  105. jorgegilmoreira jorge December 6, 2009 Reply

    hello to all!
    i have a PSP-2004 data code 8C com firmware 5.00 M33-4 installed.
    Can it be hacked to the 5.50 GEN D2?

    Thanks

  106. ds9490 ds9490 December 13, 2009 Reply

    Hi
    I’ve got a psp 2003 with the date code 8B & the serial code HB0 but my offical firmware is 6.20. If i’ve read correctly my model is completly hackable. yet does the firmware restrict anything?
    also whats the easyest way to hack it if it still is hackable?

    Thanks

  107. brendon_aka_pingu Brendon December 16, 2009 Reply

    Thanks alot for the guide!!!!
    its gr8!
    what do u suggest to buy a PSP 2000 series or a PSP 3004 series???
    plz reply

    • jessezaccagnini Jesse December 16, 2009 Reply

      PSP 2000… mainly because PSP 2000 is wayy more easy to hack then a PSP 3004

  108. brendon_aka_pingu Brendon December 17, 2009 Reply

    Thanks alot…….!!
    so given an option go for the PSP 2000 series???
    im very badly confused because the 3000 series has new features……are the new features worth it?

  109. brendon_aka_pingu Brendon December 17, 2009 Reply

    Thanks alot bro!!
    wat do u say ? is the best one to buy… 🙂

    • atmaxplorer sylv3rblade December 17, 2009 Reply

      If money is not an issue, try getting a PSP-2000 (that’s not TA-088v3 since if that’s what you get, you’re on the same boat as the PSP-3000) since you can permanently hack them. Then again if it’s possible, get a PSP-1000. It’s the best PSP model out there 😀

  110. ash_upton87 playkite360 December 18, 2009 Reply

    Hi ive got a PSP 1000 (phat) but i have upgraded the OFW to lastest version 6, can i still use a CFW?

    • atmaxplorer sylv3rblade December 18, 2009 Reply

      Yep. But you need a pandora battery to downgrade.

  111. head1 head December 21, 2009 Reply

    Hi

    I’ve got a psp 2003 with the date code 8C & the serial code HB0 and my firmware is 4.01. Can it be hacked to any custom firmware?

    Thanks

  112. carter2312x steve December 21, 2009 Reply

    Yeah mine is the same … HB serial number and 8C date code. Can it be hacked ?

  113. bryan_alconaba Tekken6w8ter December 26, 2009 Reply

    well,, you should run cfwenabler again but before that u must run succesfully the chickHEN hack

  114. shinishikudo ethan hunt December 28, 2009 Reply

    hi

    have a psp 2000 japanese with the software version 6.10 but in the serial number this star with hj8.

    it’s hackeable.

    thanks

    • shinishikudo ethan hunt December 28, 2009 Reply

      sorry

      isn`t affirmation when say it’s hackeable, is a question.

  115. chaque9 chacha January 2, 2010 Reply

    my psp is 2006 w/ version of m33 that i accidentally upgraded it to v5.51 which i cant load ISO anymore…can i still install custom firmware? or downgrade it back? please i need help T_T

    • atmaxplorer sylv3rblade January 2, 2010 Reply

      You need a pandora battery to downgrade your PSP.

  116. chaque9 chacha January 2, 2010 Reply

    just to add information on my last comment…before i accidentally upgraded it to v5.51 without knowing the cons…it was working perfectly fine with the ISO games.
    the thing is i cant play them anymore or even detect the games i placed. i just want the old version back =( or be able to play ISOs.

    Help pls…T_T

  117. jive7869 jive January 3, 2010 Reply

    my psp is version 6.20 will it damage my psp if i install firmware 5.50?

  118. twinkeez1 keke 101 January 5, 2010 Reply

    my psp version is 5.55
    serial no starts with hu2

    plz plz tell me

  119. raynier_14 darkstar14 January 5, 2010 Reply

    hi! i got a psp 2006, my memory stick can’t be read by my psp, so i formatted it. but, i don’t know what will i do next. can somebody help me with this?

  120. twinkeez1 keke 101 January 6, 2010 Reply

    it want’s to upddate to 3.03 well that let me have install firmware 5.50?

    or should i kep it at 5.55 and lnstall firmware 5.50?

  121. josh_cabezada josh January 8, 2010 Reply

    hi mr sylv3rblade, i just want 2 ask if the features of a 5.03 GEN-C is the same with 5.50 GEN-D3….thanks…

  122. shinishikudo ethan hunt January 9, 2010 Reply

    hi darkstar14

    your psp no have date code?
    is japanese or is american?
    with the serial number no have hu2 in the serial number is posbile downgrade with a magic memory stick and pandora’s battery.

  123. jetan_0692 Jennifer January 10, 2010 Reply

    Hi, I have PSP 2006 DR and Serial Number HE. Recently I accidentally upgraded it to OFW 6.10… Can I downgrade it using Pandora? Thank you

  124. lil_tupac13 nathan January 11, 2010 Reply

    hi, i love the psp and ive been working on how to hack for a week now, but ive have finally see how to after reading this.
    my problem is that my friend upgrading the psp too far, the firmware is 5.55
    plzz tell me how i can downgrade or somehow mod the psp

    PLZ

    • atmaxplorer sylv3rblade January 11, 2010 Reply

      Please follow the instructions written on the post to find out if our friend’s PSP is hackable or not. If it’s hackable then you can still downgrade it via a Pandora battery.

  125. billchat12 Shanmali January 12, 2010 Reply

    Hey Jennifer, I have the exact same problem, mine is a psp dr 2006 with HE too and its now on ofw 6.0…did you find out?is yours pandorable?

  126. billchat12 shanmali January 12, 2010 Reply

    Does this mean hackable?
    http:/i30.tinypic.com/4ub9mu.jpg

  127. jetan_0692 Jennifer January 13, 2010 Reply

    I think mine is hackable because there is high chance that it’s not TA-88V3. Before OFW 6.10, I have CFW 5.03 GEN C… I just bought Pandora kits from BargainPile.net.. I hope it will work…

    • billchat12 Shanmali January 14, 2010 Reply

      Tell me if it works. 5.03 GEN C works on TA-88v3 as well. so that’s no deciding factor, but I hope it works.

  128. bradcs Bradley January 14, 2010 Reply

    Hello,

    I just got a couple of questions. I have a psp 1002. IT has official firmware 6.20. The Date code is 5d. Can i install a custom firmware straight onto it or do i have to downgrade? another thing is that i’m getting a second memory how will this work with custom firmware?

  129. bradcs Bradley January 14, 2010 Reply

    Oh, and sorry i forgot to say GREAT article. Also i just read that any ofw one psp 1000 is compatible with custom firmware does this mean i can install CWF on my psp 1000 with 6.20 OFW?

  130. bradcs Bradley January 15, 2010 Reply

    🙁 More cost i’m still in debit to my parent for the unit 🙁

  131. juanrvieira Jua January 15, 2010 Reply

    Hi
    I would like to know if I can hack my PSP.
    This is a PSP 3000 with software 5,55
    2 months ago you said me that I must wait…Must I still waiting?
    Thanks a lot
    Juan

    • atmaxplorer sylv3rblade January 15, 2010 Reply

      You still have to wait. There’s still no way to convert a PSP-3000 with firmware greater than 5.03 to cfw.

  132. junang03 jun aguila January 17, 2010 Reply

    how can i convert my psp3000 w/ software 6.00 to software 5.03

  133. ami180 ami January 18, 2010 Reply

    i have a psp s/l 2003 ofw 4.01 and a psp 3000 with ofw 5.02 can these be hacked
    thanks

  134. im_pusa pusa January 27, 2010 Reply

    i jst want to clear myself my psp is like the image above it means i have the same unit as u mentioned .. heres my question is my psp are capable of having other version of cfw higher than my original cfw (5.03) w. chickhen r2?

    thx 4 d reply and for d guide

    • atmaxplorer sylv3rblade January 27, 2010 Reply

      Without knowing the txt that PSPIdent gave you, I can’t tell you if your PSP is hackable or not right?

  135. malka.2 Toni January 30, 2010 Reply

    Hy! can You tell mi somethinge….i have CF 5.5o gen d—and i install mame4all,that i can play donkey kong ….a instali some softwear to play psx games….and I want to play donkey kong and psp is turnoff ,now he want turn on…..i check my baterry (baterry is alright),but psp is stil is dead ….can you help me
    dont tell me he is bricked ,pleaseee

  136. jetan_0692 Jennifer February 2, 2010 Reply

    Hi, I just bought my Pandora battery and creating my own MMS 2gb. When I put the battery after MMS inserted, only the green light pop and nothing changed… Does it mean my PSP 2006 can’t be hacked? The serial number started with HE… Please, help me!!

  137. ggilfedder Gary February 10, 2010 Reply

    Is this hackable ?

    http://i777.photobucket.com/albums/yy53/Itzgaryxxx/DSCF3145.jpg

    I would be so happy if you could tell me by looking at that 🙂

  138. jonebym MarkJon February 13, 2010 Reply

    PSP 3001 system software 5.50 is not yet hackable? right?

    • atmaxplorer sylv3rblade February 13, 2010 Reply

      Unfortunately yes, there’s still no way for you to downgrade and install CFW on a PSP-3000.

  139. hituhitu1 hitesh champawat February 19, 2010 Reply

    m having PSP 3001 with 6.10 OFW. can this be hackable.. if yes then can i use old CFW like 5.50 or 5.03 or it requires new CFW….

    • atmaxplorer sylv3rblade February 19, 2010 Reply

      Nope. PSP-3000s still can’t be downgraded so they still can’t be hacked once they reach past 5.03 firmware.

  140. paulallen19 Paul February 20, 2010 Reply

    i am currently using 5.00 m33-6 and my serial number is HU8858785. Can i install this gen d3? can i still play the save files of the games i played (ISO/CSO and eboot (PSone Games)) while i was on 4.01 and 5.00 m33-6?

  141. sf93g GreYFoX February 23, 2010 Reply

    I have 2 Questions, I’m going to buy a psp soon i wanted to know, do i need to check the serial and the letter on the box/ Date code

    or one of them would be enough to check..

    and the second question is, does all new PSP come with the listed firmware up there i.e. 4.01 or less or there are new ones that come with ofw greater than 5.03

    Thanks for this Great blog/thread/post it told me what i needed to know

  142. fostynike2007 Foster February 25, 2010 Reply

    I have a psp go and i will like to know if i can have custom firmware installed on it.Anyone with a knowledge about it should please reply me.

  143. real_realsoccerbloke Pranav Mehta March 3, 2010 Reply

    HI I own a psp 2006(blue) It was already Pandora modded(I paid extra for that) when I bought the PSP with 5.50 Gen B .Now I want to upgrade it to Gen D3.Since it already has Gen B on it do I really need to care about V1V2,V3 mobo or anything else for that reason?Or should I directly upgrade it to B2 and D,D2 and D3 without giving it a second thought.Thanks

  144. berto1_97 God's Pride March 8, 2010 Reply

    Every time I turn my system off it goes back to 5.03. Is this normal?

  145. zmurtaza Rob March 9, 2010 Reply

    Hi,

    This is an excellent guide, but after reading through it, I am still unsure if I can successfully load cfw on my PSP.

    The box that my PSP shipped in has the letter G on the side, which according to your guide means that I cannot install cfw, however all the other checks indicate that I can.

    OFW – 3.95
    Serial starts with HA
    Date Code – 8B

    The last thing I want is to brick my PSP, so what can I do to clear up the confusion?

    • atmaxplorer sylv3rblade March 9, 2010 Reply

      Just upgrade to 5.03, run chickhen and run PSP Ident. That’s the surest way of knowing if your PSP is hackable.

  146. cubaam am March 16, 2010 Reply

    i have a psp 1001 how can i hack it.i.m usein ver 6.20. i’m new to this so i need help.i’m tire of buying my kids games and they keep braking so i want to put it in a memory card.can someone help me.please.

    • atmaxplorer sylv3rblade March 16, 2010 Reply

      You need to acquire a Pandora Battery to downgrade the PSP. Unfortunately, most of the CFW hacks won’t work without it.

      • itsfree2smile Mr. Bleek March 19, 2010 Reply

        So, my psp can be hacked using those things?

  147. itsfree2smile Mr. Bleek March 18, 2010 Reply

    Can my psp be hack? its PSP 2001 v6.10 and 5.50.. please answer me. 🙂

  148. singapore_abhi Abhishek March 28, 2010 Reply

    Hey my PSP is 5.00 M33-4……And it is permanent…..does this mean my PSP is NOT TA-088v3 ?

  149. recruitmann Knobby April 2, 2010 Reply

    I got a PSP from ebay for my lad, it came with fifa09 on the memory stick so presuming it has been hacked. Looks like system has been upgraded from new games / updates and is now on 5.55 and will not run iso games..
    It is an old fat black 1003, serial no starts with FB. How do I get it back to running the doenloaded games

  150. venjuliene_corpuz Veejay April 11, 2010 Reply

    hello sylv3rblade. I have a PSP-3000 and is already hacked with Chickhen Mod 2 and has a System Software of 5.03 GEN-C(Full). I can play almost every PSP games with it too. However someone warned me about having an update in Wii and then talks about upgrading the firmware version (which I am afraid will happen since I won’t be able to play ISO games anymore). So can I ask what things to avoid so that my PSP’s CFW will not be upgraded?

    • atmaxplorer sylv3rblade April 12, 2010 Reply

      Just don’t use the network update feature on your PSP’s XMB nor allow anyone else w/o proper warnings about not upgrading to use your PSP. If you’re just using the PSP to play games, listen to music, do a bit of homebrew, you’re in no danger of upgrading your PSP’s firmware 🙂

      • venjuliene_corpuz Veejay April 12, 2010 Reply

        ah when we bought the PSP, the store owner told us about not letting the battery run out or else it becomes “default” is what he said and that the files like GEN-C and Chickhen might be deleted. What does this “default” mean?

        • atmaxplorer sylv3rblade April 12, 2010

          That simply means that your PSP will revert to the official firmware and you’ll need to reinstall chickhen and 5.03 GEN-C.

  151. digitalbath2004 c00l t4c0 April 15, 2010 Reply

    If I make a pandora battery… Can I still use it to play games after downgrading and installing the CFW or would I need a new battery?

    • atmaxplorer sylv3rblade April 15, 2010 Reply

      Yep. Or you can simply revert it to a regular battery 🙂

  152. catsg88 cathy April 19, 2010 Reply

    hi. Thanks for answering my previous questions but unfortunately i’m still having doubts if I will purchase PSP 3000 that is partially hackable or the PSP 3000 that has a higher system version of 5.5 and settle for original games. just a question about the partially hackable PSP 3000, i was informed that if this unit has drained batteries or it’s battery is removed , it will go back to it’s original version? so can i still turn off the unit but just keep the battery in even without using the unit for sometime? What will happen if i don’t use the unit for a few days? thanks in advance.

    • atmaxplorer sylv3rblade April 19, 2010 Reply

      Yep, it will revert back to it’s original firmware once it turns off for any reason. If you simply leave it on standby, it won’t affect the cfw 🙂

  153. blurrymoon_09 bryan April 19, 2010 Reply

    Hello Mr. silv3rblade. Meron lang akong gustong i-confirm. Ang 3.90 M33-3 custom firmware na ba ‘yon? Kasi kung oo di puwede na akong mag-update ng CFW ng walang limit di ba, at hindi ko na rin kailangang alamin pa kung completely hackable na ang PSP ko o hindi? Sensya na medyo bago sa ‘kin tong firmware e.

    • atmaxplorer sylv3rblade April 20, 2010 Reply

      Kapag 3.90 M33 ung firmware mo, no need to confirm if it’s hackable or not. It IS hackable (kasi naka 3.90 M33). Ang non-hackable PSP usually starts with 4.01 ofw.

  154. blurrymoon_09 bryan April 20, 2010 Reply

    HOOO!!!! Nakahinga na ako ng maluwag! Salamat sa confirmation bro!

  155. juanrvieira JuanRpo April 20, 2010 Reply

    Hi…it’s me again…I’m just wondering if now my PSP is still unhackable or not…
    I have a PSP3000 with 5.6.
    any solution yet?
    Thanks for the information, nice blog!

  156. jihadfreakyguy jihad April 21, 2010 Reply

    will this work if i have 5.50 ofw ??

  157. jihadfreakyguy jihad April 24, 2010 Reply

    and1 more thing- my date code is 8c and it came with 4.01 but the serial number is HC3440581.
    can it be hacked?
    thank u in advance

  158. jihadfreakyguy jihad April 25, 2010 Reply

    and1 more thing- my date code is 8c and it came with 4.01 but the serial number is HC3440581.
    can it be hacked?
    thank u in advance!

  159. gonzalezdiego42 Diego April 29, 2010 Reply

    i have my cfw already installed i got it today its :5.50 gen D3 but when i try to save a game on my MS it freezes up then turns off why does this happen???Nd how can i fix it???What should i do???i need help plzz

  160. jihadfreakyguy jihad April 29, 2010 Reply

    and1 more thing- my date code is 8c and it came with 4.01 but the serial number is HC3440581.
    can it be hacked?
    thank u in advance!!

  161. jihadfreakyguy jihad May 1, 2010 Reply

    and1 more thing- my date code is 8c and it came with 4.01 but the serial number is HC3440581
    can it be hacked

  162. love_loser82 Steve May 5, 2010 Reply

    Hi, I used to have a hackable PSP 200x, but i have accidentally upgraded it to version 6.2 which makes my iso files unplayable. Is there anything i can do to downgrade the psp so that i could play my iso files? pls help. thanks.

  163. wowkamikaze Mike May 8, 2010 Reply

    Just wanted to say fantastic post. There is a lot of confusing information on firmware. I’ve spent the last 4 hours reading up on it.

    Im still not really clear on how to go about getting my hands on a hackable psp. I would like to get a 3000 series as seen here at ebay: http://tinyurl.com/27dv96c but from what I understand the firmware has a good chance it would already be above 5.03. I have asked the ebay seller a question on the firmware hopefully I will get a positive reply.

    If possible can people that already have this model (3000 – 3006series) psp indicate if they have had any luck in hacking it?

    The other alternative I’m looking at is buying a second hand 2000 series from amazon.com.

    Your comments and thoughts would be appreciated.

    • atmaxplorer sylv3rblade May 8, 2010 Reply

      PSP-3000s are really a tough buy especially if you’re looking into installing CFW on them AND you don’t have a brick and mortar store to buy from. 🙁 The best bet for getting your hands on a hackable PSP is to buy secondhand (which can be daunting yes but I can tell you first hand that it’s usually worth it, I got my hands on a secondhand PSP-1000 unit :)).

      As for hacking PSP-3000s, no word on when a “new” firmware is coming to help people above 5.03 firmware.

  164. leogar60 leogar May 15, 2010 Reply

    I am tired of loading the ChickHEN and CFW everytime PSP does not load. Is there a way to make it hackable. I have 5.03 and PSP 3000,brite.

    • atmaxplorer sylv3rblade May 15, 2010 Reply

      Nope, there isn’t a way to turn your PSP to a hackable one.

  165. leogar60 leogar May 15, 2010 Reply

    can we not convert a PSP 3000 which is partially hackable to hackable. I mean from 5.03 firmware to upgrade it without having the chickhen.

  166. leogar60 leogar May 18, 2010 Reply

    I have 5.03 PSP has a version 6.20 if I update to this version what will happen.

  167. leogar60 leogar May 20, 2010 Reply

    do you have a download for chickHEN R3 I heard it’s available.

    • atmaxplorer sylv3rblade May 21, 2010 Reply

      It’s just a rumor. Everyone’s been waiting for R3 since last year.

  168. iceland46 Eull May 29, 2010 Reply

    My psp has 5.03 GEN B Full. It works from the start but when i enable the ChickHen yesterday, my psp restarts and i can’t enable the CFW. Please help and thank you.

  169. blabbermouth8x BlabbeRMoutH8X May 29, 2010 Reply

    Dude can u please post a guide on the newely released HBL revs……..
    cause im really confused which homebrew will work on my PSP 3004 6.10
    should i upgrade to 6.20 and then check HBL
    which is the best HBL to install at present for the 3000 series?

    thanks alot
    CHeers

    • atmaxplorer sylv3rblade May 29, 2010 Reply

      Well since you’re on 6.10 on a PSP-3000, you can’t install any cfw or hbl. There currently is no way to downgrade your PSP either.

  170. daneanne_yu Xxdewdropx3 June 3, 2010 Reply

    it says in the box, PSP-2001 cw no letter A-G and then numbers.. is it hackable? :/

  171. daneanne_yu Xxdewdropx3 June 3, 2010 Reply

    for my psp:
    1. my system software is 5.50 GEN-D (Full)
    2. my serial number has YB0 in the start
    3. there’s no letter
    4. 7D

    what do i do? it’s my first time hearing cfw and i seriously want to play this game sooooo bad! please help…

    • atmaxplorer sylv3rblade June 3, 2010 Reply

      errm.. your System already has CFW installed.. note the word GEN-D at the end.

  172. limline3 cline June 5, 2010 Reply

    hey problem here. chickHEN worked out fine for me but when i started using PSPident it reads “corrupt” after transfering it to game3xx folder. what seems to be the problem here? is anyone having the same problem? help

    • atmaxplorer sylv3rblade June 5, 2010 Reply

      Check the folder structure. You might have an extra folder thrown in there.

  173. daneanne_yu Xxdewdropx3 June 5, 2010 Reply

    sorri if i’m stubborn, i’m desperate… can i upgrade a 5.50 GEN-D (Full) to a 5.50 GEN-D3??

    • atmaxplorer sylv3rblade June 5, 2010 Reply

      Yes. It’s actually recommended so you can play the latest games.

  174. daneanne_yu Xxdewdropx3 June 5, 2010 Reply

    thank you very much for your help!!!!

  175. real_realsoccerbloke Pranav Mehta June 5, 2010 Reply

    Hi sylv3rblade if you remember me I had asked for your help regarding upgrading pandora modded psp from gen b to gen d3.
    Ok this question might be out of place but ive heard to play MGS peace walker you need to be on Gen D2 so is there a way using which I can downgrade my PSP from CFW 5.50 Gen D3 to 5.50 Gen D2.I tried searching for videos on youtube.com but didn’t come across any.

    • atmaxplorer sylv3rblade June 5, 2010 Reply

      You’ll be needing a Pandora Battery to downgrade from 5.50 GEN-D3 to 5.50 GEN-D2.

      • real_realsoccerbloke Pranav Mehta June 5, 2010 Reply

        Ok is there any other way using which I can play MGS peace walker on my 5.50 gen d3 🙁

        • atmaxplorer sylv3rblade June 6, 2010

          Currently looking for a patched version butttt.. are you playing the Jap version or the leaked US version?

  176. real_realsoccerbloke Pranav Mehta June 6, 2010 Reply

    Hi I mean the American version.(i dont understand japanese)

    I tried the one on torrent(i think 1350+ mb size) but it gave me “couldn’t start the game errror.”some 18002048 error i think”.
    So i tweaked around few recovery mode settings changed the drivers from M33 to other ones and tried changing kernel from 5.xx to 1.5 too and also enabled/disabled plugins,installed KHBBS plugin(and enabled it) too but it made no difference

    So what i did was i patched it using tools like WOSG UMD,promotheus and prxdechack. I patched it alright I mean i did everything perfectly accrding to the tutorial and the final outcome showed up like the one provided on tutorials final screenshot but when i start Peace Walker it shows the white psp screen with usual sound and then after a while screen goes black and after a while the PSP turns off by itself.(maybe you can figure out whats going on here).

    So what I am trying to do right now is trying to download the European version of the game.and Ill let you know in few hours time if it works but from what ive heard European version freezes randomly too on gen d3.

    • atmaxplorer sylv3rblade June 6, 2010 Reply

      I’ll look into a patched version this week.

    • 12darkprince Darkelemrnt June 7, 2010 Reply

      You dont use a torrent driver, you have to use a file extractor like win RAR. (I found that one out a while ago myself. I had to contact Utorrent)

  177. jdofollosco jd June 10, 2010 Reply

    is version 5.70 hackable?

  178. nr.Azlan Milan June 11, 2010 Reply

    PSP 2001 HC1 with FW 6.00 is it Hackable.

  179. limline3 cline June 11, 2010 Reply

    okay, thanks a lot man. i figured out the problem. i would also like to ask if there is no way i could have a permanent cfw for a ta088v3? because the battery i have is fake, it might drain easily. so i would have to update every so often?

    • atmaxplorer sylv3rblade June 11, 2010 Reply

      There’s simply no way to install a permanent cfw on your PSP so you really have to deal with either keep tabs on the battery or running the installation all over again

  180. limline3 cline June 12, 2010 Reply

    what does reload and reflash mean? because i think i remember somebody say, when your battery is drained, you have to reload it, not reflash it. i dont get these things.

  181. limline3 cline June 12, 2010 Reply

    i would like to also ask. given the state of my PSP-TA088v3. how do i change the control configuration “o to x” without completely turning off the power. actually, i tried using the select button to enter the recovery mode. but once i change the keys, it only works with the recovery mode. but when im out of the recovery mode, its back to o as enter. help please. thanks man.

  182. helmisyahmizzyabas MIzzzzzzzzzzzzzzy July 9, 2010 Reply

    So i have a slim psp wif this
    -motherboard : Ta-o86
    -software :3.90 m33-2
    -1st gen..
    i can install a cfw with this psp rite???
    If can,what kind of cfw is good???? :> please help

  183. kakashi909 paolo x July 11, 2010 Reply

    i have a PSP2001 with 5.03 serial number HU2308265 there is a GEN-C converter installed. Can it be permanently hacked? tnx

  184. semi_taz semi July 17, 2010 Reply

    i have a psp 1001 ver2.80 i cant figuere out what to do

  185. guneet117 Guneet Singh July 22, 2010 Reply

    hi,i have a psp 3003 with the ofw 5.03

    can it be partially hacked,i read the post bt unsure about the motherboard model?

    thanks

  186. bunty_satya bunty August 28, 2010 Reply

    I have a psp 3004 ver 6.10 ..Can i hack it???

  187. ihavenoclue25 jake September 23, 2010 Reply

    is 6.30 hakeiable

    • atmaxplorer sylv3rblade September 23, 2010 Reply

      Depends on your PSP. Please use the guide on this post.

      • timothy21 timothyjhamez December 22, 2010 Reply

        blessed day sir i just want to ask how can i down grade my psp 3004 6.30 date code is OC serial started with the letter HC. i bought this new and which firmware would you advice to me thnx i waiting for your responds….

        • atmaxplorer sylv3rblade December 24, 2010

          PSP-3000s aren’t downgradable :/

        • timothy21 timothyjhamez January 2, 2011

          good day sir so can i ask which is easyway to run a download games to my psp 3004 6.30 and how can i changes my OFW? thnx…

  188. blabbermouth8x BlabbeRMoutH8X September 26, 2010 Reply

    plz tell me if a hack is out for the 3004 6.10……other than HBL is there any ways to run CFW….???
    plzzzzzzzzzzzzzzzz
    im fed up…..dude cmon is more than like 1 and a half year and still nothings out…..whyy???!!!!
    plz help….!

    ur guides by far the best and easiest one to follow thanks 😀

  189. blabbermouth8x BlabbeRMoutH8X September 26, 2010 Reply

    is the crack for 6.10 out….?? thats all im asking…..

  190. neo_raydge maharot September 30, 2010 Reply

    may i ask if a psp slim 3002 is hackable?

  191. luismadrigal20 alex October 31, 2010 Reply

    my psp doesnt have a date code its a black psp 2000. is it hackable?

  192. jonebym jon November 23, 2010 Reply

    can a psp 3001 with ofw 5.5 be hack now?

    • vek_boy newToPsp December 16, 2010 Reply

      psp 3000 5.50 firmware…can this be hacked to play iso games….got 1 as a gift,dnt knw wat to do.plzzz helllpppppp. 🙁

  193. thesaints1898 dreck December 6, 2010 Reply

    my psp is psp2004 show in the example 8C how can i unable it in cfw to play iso/cso

  194. thesaints1898 dreck December 6, 2010 Reply

    i asked it is hacksble

  195. thesaints1898 dreck December 6, 2010 Reply

    what can i do my psp is G what should i do to make it iso/cso enable

  196. info.isb juranimopub December 21, 2010 Reply

    i have psp 2003 piano black with of 6.00
    its serial No is HB0754152 and date code is 8c can anyone tell me what motherboard it have. please tell me if it can have cfe. thanks in advance

  197. mastercloud68 Leon December 21, 2010 Reply

    ok.. so what you’re saying in the above instructions is, as long as its not HU2 its completely hackable? or what? mines HU0 like the pic, so it isn’ counted in the “partially hackable only” bit, right?

  198. mastercloud68 Leon December 21, 2010 Reply

    i ask because chickhen doesn’t like me right now and won’t hack for the past 2 days so..

    • atmaxplorer sylv3rblade December 22, 2010 Reply

      Chickhen won’t run unless you’re specifically on 5.03 ofw, is that your current firmware version?

  199. hanskreuznach hans January 9, 2011 Reply

    Yo sylv, I just want to ask if I can play UMD ISO games on a PSP Go?

  200. metalshredder1990 executable19 March 1, 2011 Reply

    Is there ANYWAY I could play an iso on my psp go?
    1.PSP GO
    2.The letter is C.

    • atmaxplorer sylv3rblade March 1, 2011 Reply

      There currently is no way for you to downgrade your PSP Go (and allow you to play ISOs) as your current firmware is 6.37. There is however a Hen available for your firmware which will allow you to run homebrew. Again no ISOs.

  201. metalshredder1990 executable19 March 1, 2011 Reply

    I’m sorry, I forgot to mention, I’m on 6.37, if it is not released yet, can you tell me approximately when?

  202. metalshredder1990 executable19 March 1, 2011 Reply

    And can you downgrade a psp go WITHOUT a Pandora Battery?

  203. vk17596 vishal April 5, 2011 Reply

    what do u think about psp 3004

    plzzz reply fast

  204. flinstonesoo littleangel April 9, 2011 Reply

    hmmm!! SilverBlade, you are too good to be said better work done. I love everything in here and Please, isn’t there any way to know your motherboard apart from loading a chickHen and PSident and from the Box? Thank you. PSP hacking all the way.

  205. chrisj_15 chrisj_15 April 9, 2011 Reply

    Please help me! I once contacted help in a gaming store and they told me that my PSP only supported 5.03 GEN-C because my PSP can’t create a Pandora battery, but my PSP is currently TA-088v1/v2 and my PSP version is Slim v.20/2.1. So is my PSP hackable or not? Please, anyone help me ASAP!

  206. carlo_mina10 Carlo April 10, 2011 Reply

    um sylv3rblade i just want to ask if it is possible to change 5.50 gen b full to 5.50 gen d3.

  207. chrisj_15 chrisj_15 April 11, 2011 Reply

    Hello? Can anybody have an answer on my situation? And my PSP also had 3.80 M33 installed back then but I wasn’t sure if it was M33-5 or 6, and my box’s identification letter is probably F.

    • atmaxplorer sylv3rblade April 11, 2011 Reply

      If your PSP had 3.80 M33 then your unit is completely hackable.

  208. chrisj_15 chrisj_15 April 12, 2011 Reply

    Ok, thank you sylv3rblade! I wondered for how many months if my PSP is hackable or not.

  209. greymane1992 saint dusty April 22, 2011 Reply

    will a new version or anything like checkHEN be created to support 6.38 in teh futures?

    • atmaxplorer sylv3rblade April 22, 2011 Reply

      Unless a new exploit will be discovered that’ll give kernel access, I highly doubt it. HBL is available for 6.37 but there’s no ISO support since that’s been patched too.

  210. bovee101 Randy June 19, 2011 Reply

    hey i bought a psp-1001 and the serial # is FU7258553 and the date code 6c
    can it be modded with the cutstom fireware

  211. gold_4ce ace June 22, 2011 Reply

    excuse me, may i ask for some question, and would you like to answer me please??
    i have PSP 2000 and its features
    1. Motherboard Model :TA-088V1/V2
    2. Motherboard type : Slim2000
    3. UMD firmware ver. : 1.240ANov10,2006
    PSP version : Slim v2.0/2.1
    Possible CFW : Yes, w/ custom IPL
    my question is…Can i Hack this thing permanently??? if its can, what version of it
    firmware should be/should i upgrade it to 5.50 or 6.xx???
    please give me an right answer….for a week i looking for the right hack for my PSP…

  212. adriandanoy aj July 2, 2011 Reply

    what about 6.35 PRO-A3

  213. abdsaada coucoumani August 14, 2011 Reply

    hi to all
    I have a psp 2001 with firmware 5.03 motherboard ta-88v1/v2 I tray all thing to hacked it when I install the Hellcat’s Recovery Flasher it show Error is that because I’m doing it wrong or my psp can not be hacked can you help me please how to do it correctly
    thanks

  214. dmwudevil noob August 18, 2011 Reply

    I have a psp 2000 3.60 and its serial is HU. I have it at 6.60 right now so can i hack it at all?

    • atmaxplorer sylv3rblade August 18, 2011 Reply

      ummm.. psp 2000 3.60?

      • dmwudevil noob August 18, 2011 Reply

        psp 2000 OFW 3.60 but now its OFW 6.60 ( latest update )

        • dmwudevil noob August 19, 2011

          psp 2000 ofw 3.60 now its 6.60
          if i can hack it
          what steps should I take

        • atmaxplorer sylv3rblade August 19, 2011

          Your only recourse is to purchase a Pandora Battery as there currently is no confirmed working downgrader for 6.60.

  215. dmwudevil noob August 19, 2011 Reply

    ok thanks so if i do get one what to do?

  216. zcen033 kristin pelino August 29, 2011 Reply

    good day sir,

    excuse me, may I ask for some question too, and would you like to answer me please??

    I have PSP 3000 and its features:

    1. Motherboard Model: TA-090 v2
    2. Motherboard type : brite (03g)
    3. PSP version : brite v1.0

    I know, it is not CHA right?
    my question is what latest CFW should I install here? so that I can play these game Monster Hunter
    Portable 3rd, and DOA paradise.
    and how can I play those game on my PSP featured? (psp brite)

    thanks in advance..

    • atmaxplorer sylv3rblade August 30, 2011 Reply

      Hi Kristin, you can start studying about hacking your PSP using this guide.

  217. nsarotobi Rj December 14, 2011 Reply

    sylv3rblade,need a help!i have a psp 2000 6.39 ofw with a serial number starting with the following letters HJ on it…is it hackable?or is there any chance for me to have a custom firmware?thanks !!because i’d like to upgrade it to 6.39 ME-2 cfw..hope u response..

  218. razugrg Razu August 9, 2012 Reply

    Is it possible to recover back in normal the PSP 2000 which was not in hackable list, but tired and became totally seized…?

  219. aian_diokno2000 aian September 20, 2012 Reply

    hello, can i hack my psp with version 2001 and software 5.50 GEN-D3? cause i didnt quite understand, if a version 5.50 is hackable or not. you only said that 5.50 “above”, i just want to clear it. and please reply asap, i really really want to play ff7cc now 🙁

Leave a Reply to FosterCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

website stats