Install Signed 6.35 Hen PRO + Prometheus ISO loader on your PSP
Great news for PSP users running 6.35, you can now install 6.35 Hen without running the Minna no Sukkuri demo exploit as instructed in the original post. With Liquidzigong’s release of a signed 6.35 PRO, you can run it directly from your XMB.
Requirements for Signed 6.35 Hen PRO and Prometheus ISO loader
- A PSP-3000, PSP-2000 with TA-v88v3 motherboard or PSP Go with official firmware 6.35 installed. If you have a hackable PSP, I would recommend to install a permanent CFW like 5.50 GEN-D3. If you’re not on 6.35, follow the upgrade guide for your PlayStation Portable on the troubleshooting part of the guide
- Signed 6.35 Hen v3 (note that version 3 is the latest version. Version 2 is here for here archive purposes only)
- Light VSH menu: PSP-2000 | PSP-3000 | PSP Go
- Prometheus ISO loader
Important Note: If you’re installing on a PSP-2000, be sure to turn off the UMD cache otherwise the Hen may not run
Installing Signed 6.35 Hen PRO and Prometheus ISO loader on your PSP
- Extract the Light VSH menu file for your PSP model on your computer.
- Copy the plugins folder directly onto your memory stick or the storage of your PSP Go.
- Extract the Signed 6.35 hen.zip file onto your PC
- Copy the extracted folder to x:\PSP\GAME (x is your memory stick or the PSP Go‘s storage)
- Extract the Prometheus ISO loader onto your PC
- Copy the extracted folder to x:\PSP\GAME (x is your memory stick or the PSP Go‘s storage)
- On your XMB, the 6.35 Hen installer and follow the onscreen prompts
- Once you’re back on the XMB, press “select” to make sure the Hen menu displays correctly.
- Follow this guide: Installing the Prometheus ISO loader on your PSP.
- Enjoy your Free PSP Games :).
Update: Added installation of Light VSH Menu. Why is it at the start of the installation process? So you can immediately load it after installing the Signed 6.35 Hen.
Important Note: Be sure to check the Prometheus ISO loader compatibility guide
Important Note: You need an ISO folder in your PSP’s memory. Simply create one and dump your PSP ISOs/CSOs there.
A bit of warning, this Signed 6.35 Hen PRO does not include HBL (Homebrew Loader) so you may not be able to run plugins as some of them require kernel access. Still if you’re just looking to load ISOs on your PSP then this is as simple as it gets. If you still want to run homebrew applications however, I’d recommend the 6.35 Hen over this.
If you’re not on 6.35 OFW, follow this guide on how to upgrade your PSP to 6.35 so you can install Signed 6.35 Hen: HowTo: Upgrade your PSP to 6.35 OFW.
Source: Liquidzigong’s Twitter, Wololo
If you’re on a different firmware, you may want to take a look at other Hen installations:
- 6.20 TN-A
- 6.20 TN-C
- 6.20 TN-D
- 6.20 TN-E (updated version)
- 6.20 Pro-B5
- 6.31 Hen
- Signed 6.31 Hen (updated version)
- 6.35 Hen
- Signed 6.35 Hen (updated version)
- 6.35 Pro-B5
Thanks man!! it’s working! i’ve PSP 2000..
but why should i load Signed 6.35 Hen everytime i reboot my psp?
and there’s something weird happened when i load Signed 6.35 Hen.. i got black screen and back to XMB.. if i press “Select” there’s no Hen menu display.. but i got 6.35 Pro on my system info..
what’s wrong? any advice?
You need to reload it because it’s not permanently installed on your system.
As for the VSH menu, probably because of your PSP model.
not permanently installed? is that normal? do u know how to install it permanently?
yes it’s normal. Currently there’s no way to permanently install this on your PSP.
thanks. it works. but when i start a game and load the save game it says save data corrupted. is it usual?
Are you trying to load a new game?
Have you tried any other game?
nope. i tried to load the save game that i played before i upgrade to 6.35. any suggestions? thanks a lot
Ah, this is part of the risk when upgrading :/ Are all your other saves corrupted as well?
oh. i think it’s just this one.
hello….. is there a signed 6.31 HEN ????…
i really need it…
For now there’s none since most of the devs have jumped on to 6.35
syl….may you give me the download link of the OFW of 6.35…..
i am following your advices…..
whoops i forgot to upload those, hang-on
ok…. i’ll wait….. thank a lot bro….. just reply here… ^_^
Extract and place it in X:\PSP\GAME
hi sylv3rblade, do you other site where to get or download the 6.35 PRO HEN and the Prometheus ISO loader, because i can download onto this site http://uploading.com/files/7bd2d16b/PSP_6.35_FW_UPDATE.
pls send me other site pls… thanks
it is corrupted data… awts…
odd, can you take a screenshot of the directory where you put the update folder?
hahaha…it is working now… you gave me wrong directory… X:\PSP\GAME\UPDATE
ah lol, my bad 🙂
it is working bro… thanks a lot…
I have a quick question. where do i place the downloaded iso games?
create an ISO (or if you already have one) and copy your games there.
if i install it , no homebrew work ? like emulators? picodriver?
Homebrew yes, plugins no.
so the iso loader , picodriver , and n64 will work on this ?
Yep. It’s basically the same as the 6.35 Hen, just without the ability to run the plugins and is much easier to install on your PSP (since you don’t need to run Minna no Sukkuri)
nice, is it compatible with all iso ? and if i turn off my psp will it go off?
hey i have 6.31 pro on my psp how can i install it ? do i need the ofw 6.35 first ? from where i get it ?
i also need to ask you something if i use the other one , but no signed , will cxmb work for me ? with any ctf theme?
@nadine…. sylverblade gave me this link…. upgrade your psp to 6.35…..
extrace the zip file and copy the file “eboot.pbp” to X:\PSP\GAME\UPDATE
after upgrading it… follow the steps above….
help it says that the firmware isnt compatible it cannot be started i must use update data that is compatible with the model in use visit sony website for your region i cant start the update help me pleasee
Odd.. I’ll do a recheck on the file and see if I need to upload a different updater.
i have a psp go , maybe your update isnt compatible ? i tried also 2 different updates and have the same problems , maybe my psp need update from different region , ? its arabian?
Nah, it’s the updater. Banban’s PSP isn’t a Go which is why it worked. Currently uploading a 6.35 updater for the PSP Go. 🙂
okay thanks im waiting
is it safe to use this on this firmware :
Yep it’s safe but I’m not sure if it’ll work :/ compatibility issues.
okay thanks now this updates works now im charging my psp then ill use this firmware , if i use the normal firmware can i use cxmb plugin ? for ctf themes ? (themes rather than the 3rd birthday) i have my own made one when i had my psp 1000
it works thanks…
Put the folder inside in PSP\GAME\Update
thanks ill try it now , damn my download speed is 15kb/s
thanks this update works now im charging my psp when ill start with this firmware
@nadine & syl
sorry my bad…. i really dont know what psp you have… hahahahah
updated the new link to Signed 6.35 Hen Pro version 3.
You guys may want to upgrade to this build (just rerun everything) if you’re experiencing problems when installing plugins.
I still using 5.03 Prometheus-4 on my PSP 3006, I’m just not ready to update to 6.35 Hen PRO.
It works! But Monster Hunter Portable 3rd won’t load, it just goes black when I load it via Prometheus IsoLoader. What can I do, please assist me if you can via here, or mail. I would appriciate this incredibly much.
Try looking for an untouched/unpatched MHP3G ISO.
@sylv3rblade: Pretty sure mine is, but guess I’ll keep looking if it’s working for anybody else, please contact me via mail.
Looks like MHP3G isn’t working even with the Openidea ISO loader.
For those getting the black screen problem when loading MHP3, it’s because you’re missing a file in your prometheus folder called “isofs_550.prx”.
Find and download it with google and MHP3 will work then.
You can also use 6.35 Pro-A to sidestep this problem too, I think, but Pro-A currently has a bug that breaks any PSN content you have.
If you don’t care for PSN, use Pro-A.
Yeah, definately not the iso I’d say, tried 3 different versions now. It just goes to black and then doesn’t move, mhfu starts up fine. Help 🙁
Yeah, I can’t get any kind of .cso or .iso file to work using Prometheus after I start up the 6.35 Signed Hen, it just black screens like a bitch after I try to load the .iso.
Also, anyone know a psx emulator I could run on the 6.35 Signed Hen? I’m pretty new to HEN, I tried it awhile back with my 1000, but it never worked, so I’ve just updated as I’ve went along and now I’m at 6.35.
I’m working on getting the 5.00 OFW so I can flash back to that with Hellcat’s, then install the 5.50 FW so I can get 5.50 Gen-D or whatever on here, since I’ve got a 1000 and stuff.
Dial-Up is a dick….
Some folks have confirmed that the Popsloader for 5.50 GEN-D3 works for 6.35 Hen (both the signed and non-signed versions). Also if you’re looking to downgrade, you may want to wait for the new Hellcat’s Recovery build. As of now, build 1.65 works with 6.20 TN Hen.
i have psp 2000 with OFW 5.50 how to hack this thing syl ???
dude, which is best to use 6.20 TN-C or 6.35 PRO ??????
i am confused right now…..
both are currently in development but 6.20 is getting updates faster.
how to take screenshots or do other things with this VSH Menu…
do smackdown vs raw 2011 run on psp 3004 6.35PRO
how do i work the vsh menu
press select. Do note that by default, if you don’t have the light VSH plugin installed (which is included in this guide), you don’t have a VSH menu
Thanks, the HEN and Prometheus works great. I have one question though. I transfered savedata from one stick to another and reinstalled HEN and whatnot. Before the switch, I had no problems with the ISO, same with my sisters. But now the game that uses the savedata freezes at a certain part of the game for me. I’ve read that it might have something to do with plugins being there from before I switched sticks. If it is the plugins, is there a way to disable them? Or is there another problem?
I’m thinking the stick you’re using now is suspect because if there was a problem with the plugins, saves, etc, it simply wouldn’t run. Try backing things up, reformat the memory stick and then recopy your files.
Also, you said you have reinstalled Hen, are you using the very same Hen version as before?
I reformatted the stick and put everything back on, but the ISO keeps freezing at that exact point, or area. I’ve reformatted and reinstalled a few times, and I got past the freezing point once, but the game ended up freezing shortly afterwards.
As For the version of Hen, it’s the same file I downloaded from here.
I have a feeling the problem deals with my stick switching since it works perfectly fine with my sister’s PSPs. But I don’t know for sure.
Also, I just noticed that my system version went from just “6.35” to “6.35 PRO” if that matters. I don’t know how.
It could that the memory stick has some damage which is why you’re having problems (e.g. game freezing). But then again it could also be a problem with the card reader on your PSP.
I would suggest using a different stick, reformat, recopy files then trying it again to see if the problem persists. If it does, you may need to have your PSP checked.
As for the 6.35 Pro, don’t worry, it just indicates that your PSP has cfw installed.
Hm, I tried using a stick with the same things installed on it as mine and it works perfectly fine. I guess it’s my stick, O.o
oh. I had it the other way around ._. my bad.
Yeah, try a different stick.
Great news for 6.35 users, 6.35 Pro-A has been released: http://atmaxplorer.com/2011/02/install-6-35-pro-a-on-your-psp/
A part of Light VSH menu, everything is working on PSPgo N1003.
When I press Help nthg happens, but can play iso games. Tested MH3p
Thanks alot ihve installed this dumber but i have a question
if i edit my PSP with this loader can i connect to the net without blocking my PSP?
Yes, you can still connect to PSN via your PSP with 6.35 Hen
hi i have a problem too..
once i had the psp power off and i removed the card..now when i go to the prometheus iso loader it says “the game cannot be started the data is corrupted”..
Just re-run 6.35 Hen again before running Prometheus ISO loader
i have done it five times but nothing..
any other solution??
Hmm.. that is odd, have you tried redownloading and the replacing your current files for the installer?
no i ll try..thanks a lot..!
Is it working on 6.31 OFW ??
You need to update to 6.35 ofw or use Signed 6.31 Hen
where do i create the ISO folder
Create it on the root directory of your memory stick
when i run ranchet and clank size matters cso my psp cuts off
Make sure that:
1.) You’re playing the ISO version of a game and not the CSO
2.) The game you want to play is compatible with the Prometheus ISO loader:
but every thing else like the menu works but games shut down when i run it on the iso loader
nope i cant play no games it just restarts
hi. question? i have psp 3k chicken hack wid prome 3. can i upgrade to above version? how can i do that? thanks
Yep. Just unload chickhen and update to 6.35 then follow the instructions above.
Yo… here’s the question.. Is there anyway for me to downgrade my psp – 2000 OFW 6.35 to 5.50 GEN-D without using a pandora battery or a magic mem stick??
If your PSP is hackable then yes, there is a way but if it’s not then that’s a negative.
Hi, I’ve been reading pretty much everything you’ve posted so far but I’m still having trouble getting this thing to work. Here’s what I’ve done.
I have 3004 PSPslim with 6.35proB5 CFW installed aswell as the Prometheus ISO loader. I have a confirmed working CSO file (Persona 3. ) from that site you referred to and I have placed that file in an ISO folder in my memory Root.
When I start up Prometheus I can change the ISO mode, refresh and exit. I can’t change the directory, or at least, it’s not responding.
Where could I have gone wrong and could you please help me with this?
Thanks in advance – Elias
Hi Elias, with 6.35 Pro-B5, you don’t really need the Prometheus ISO loader since it has better drivers (inferno)
Haha, guess I got a bit confused reading posts made almost 2 years ago. So do I just place the .CSO files in my ISO folder and it should pop up? Or do I need to configure anything before? I am really sorry for troubling you but considering how hard of a time I’ve had finding up to date information it would be of much help and very appreciated if you could point me in the right direction.
Yep. Just pop them in that folder and they should come up as playable straight from the XMB
Hah, Thanks alot seems like I was doing it right from the beginning only that I was using a file that didn’t seem to work.
I have a PSP 2006. I am using chicken R2 on 5.03 firmware for now. each time i switch off I have to use the egg tiff exploit, then CFWenabler xenogears & Becus25. Can I use signed 6.5 hen pro? I only play ISO
Upgrade to 6.35 Pro-B5 instead.
Do note.. fully turn off your PSP before proceeding to unload ChickHen
How about PSP GO , Firmware 6.5??
You can use 6.35 Pro-B5 on the PSP Go as well.
ok its in my psp go. works great so far. It cant be installed permanently right. I tried switch of completely and then back on it was gone. I used fast recovery now its ok. Do I need to keep the PROUPDATE folder on PSP??
You can remove the Pro update folder but I would advise to keep it just in case. 🙂
Ok thx. Done on my psp 2006 too works great. two last questions hopefully :D.
1. did you advice me to use 6.35 Pro-B5 because its the latest or is it the one i should use for PSP GO and psp 2006??
2. I got some purchased games from psp GO. I copied the folder + eboot.pbp to my psp 2006 and i get error 80010087 game cannot be started. is there a way to get this to work??
1. I would advice 6.35 Pro-B5, it works great on the Go.
2. What game are you trying to play? Did you copy the games manually to your PSP? Have you tried to login to the PSN (basically activate your PSN account on your PSP) from the PSP -> this is required to play any purchased PSN content?
2. Ben 10 vilgax attack os the game. I just copied it from my friends PSP Go to my psp 2006. I do not have a PSN account. There isn’t any way to get the game to work apart from PSN account ???
Nope. You really need to activate your PSP via PSN.
Tried to activate thru PSN network on the cfw i get connection timed out. when use the OFW i’m asked to do a required update before proceed. any advice? i know i should not update firmware tho
Install to 6.35 Pro-B5
Also, PSN is down at the moment for some regions it seems :/
ok. done installing 6.35 pro-B5 since before. when i tried PSN with it i get connection time out. But if i switch off completly (going back to OFW) i am asked to do a required update before proceed. Ill wait and see if the connection timeout error fixes itself
I’m running a PSP 2001 with 6.35pro b6. I’m trying to run a patched version of MH3rd. On the XMB the MH3rd ISO shows up as corrupted, but on the Prometheus loader it shows up as a valid ISO. However, when I load it, I get a black screen and have to hit the Home button to get back to the dashboard. Do you have any suggestions for me so I can get MH3rd running? Thanks very much.
Patched as in patched with the english translation or patched for a different firmware? The ISO could be both which is why it’s not loading properly.
I have installed 6.35 HEN and Promethus ISO Loader but i get a black screen when i click ‘x’ to load an iso. Please help thanks.
im having problems with launching my game in promethus it was working when i first tried it and then afterwards when i try to run an iso it hangs what should i do?????
PSP-2000 signed 6.35
another thing my psp shows a message saying “the disk could not be read” do you think that is the reason why it hangs whenever i load iso games but in the psp the icon of the memory card still shows….
im pretty new to this one, i wanted to play kamen rider climax so bad so i might wnna try usng this firmware without sukirri. i have a psp go promotheus 0.1 then a sukirri. whenever i starts the game it hangs and doesnt continue at all.
Try installing 6.35 Pro-B6 instead. Installation is very simple compared to this one.
Thanks a lot. I’ve been trying forever to get isos and I finally got it.
i just got my new psp 3003 pb with version 6.35 and i don’t know how to modify it plz help…..
Hi, please read up on the Dummy’s Guide to PSP CFW.
i have 6.35 POR B5 And i try run MHP3rd and she says Game could not be started (806524). I changed all drivers bt stil same ploblem and i have module 09g btw. Please help 🙂
You probably have a patched copy of the game. Download a copy from our Free PSP Game depository
Thx :)) Now i should download all parts after extract right?
Please tell u u got a link wyth a MHP3rd Torrent works for 6.35 pro b5 :)) thx
No torrents, just direct downloads
ok thx now i must wait 2 days till all is downloaded :))
dude is the light VSH important? If it is what is it for? :O
The VSH menu allows you to tweak options 6.35 HEN PRO, without it you can’t change anything.
where do i put the bin file???
also when i select the hen file….a weird japanese/chinese game opens….what do i do???….the instructions say tht i had 2 open the hen program then the prometheus program…can u pls help?
Are you using the files on this page? Because one with the Japanese game is the old installation method. Please follow the instructions on this page.
why cant i play Corpse Party on my PSP 3000 which is updated to 6.35 Pro need help. and another thing can i still play GBA and GBC games on a psp which was already updated to 6.35 Pro if yes tell me what folder should i place the emulators Thats all.
whoops ive just answered the 1st question i asked u by myself thanks to all the links youve got updated mine to 6.35 pro b9 now the only thing i want to ask is can i still play GBA/GBC games? thats all thanks! :))
Yep. You’ve just updated the driver for the ISOs so homebrew will still work.
i cant play corpse patry on my psp 3000…what should i do??
Upgrade to the latest PRO build, 6.35 PRO-B10
its says corrupted data,,
i have psp 3004