Atma Xplorer

Xploring Games, Computing, Photography

Install 6.31 Hen + Prometheus ISO loader on your PSP

PSP owners with 6.31 OFW can now have cfw installed courtesy of the 6.31 Hen, 6.31 hbl by wololo and the Prometheus ISO loader.  Note that if you’re on 6.20 OFW, follow this guide instead.

Requirements for 6.31 Hen and Prometheus ISO

Important Note: if you’re having problems with installing 6.31 Hen, try out the guide on installing the Signed 6.31 Hen PRO

Installing 6.31 Hen and Prometheus ISO loader on your PSP

  • Extract the Mina no Sukkiri Demo onto your PC
  • Copy the folder (NPJG90047) into x:\PSP\GAME (x is your memory stick or the PSP Go‘s storage)
  • Extract the 6.31 hbl.zip file onto your PC
  • Copy it’s contents directly onto your PSP. This contains both the homebrew loader and the exploited save data.
  • Extract the Prometheus ISO loader onto your PC
  • Copy the extracted folder to x:\PSP\GAME (x is your memory stick or the PSP Go‘s storage)
  • Extract the Light VSH menu file for your PSP model on your computer.
  • Copy the plugins folder directly onto your memory stick or the storage of your PSP Go.
  • On your XMB, Run the Mina no Sukkiri
  • Select the second option to load the save exploit.  This would automatically load Hen onto your PSP and it will revert back to XMB
  • Once you’re back on the XMB, press “select” to make sure the Hen menu displays correctly.
  • Follow this guide on how to install the Prometheus ISO loader on your PSP: Installing the Prometheus ISO loader on your PSP.
  • Enjoy your Free PSP Games :).

Update: Added installation of Light VSH Menu.  Why is it at the start of the installation process?  So you can immediately load it after installing the 6.31 Hen.

Important Note: Be sure to check the Prometheus ISO loader compatibility guide
Important Note: You need an ISO folder in your PSP’s memory. Simply create one and dump your PSP ISOs/CSOs there.

If you’re experiencing problems with loading HEN (symptoms include blue screen, freezes and turn off automatically), follow the tip below:

  • Just as HEN started to load you just ticked the power button .. your PSP will go to standby mode … then switch on the power button again Your PSP booted up hen.
  • Backup your savegames and PSN content, and reformat your card.
  • Turn off UMD-cache

Troubleshooting:

If you’re not on 6.31 OFW, follow this guide on how to upgrade your PSP to 6.31 so you can install 6.31 Hen: HowTo: Upgrade your PSP to 6.31 OFW.

credits to Liquidzigong aka Virtuous Flame aka Vflame

If you’re on a different firmware, you may want to take a look at other Hen installations:

Tags: , , , , ,

Comments ( 134 )

Have Something To Say ?

  1. sayemahmed1995 dunno January 4, 2011 Reply

    got psp 1000

  2. sayemahmed1995 dunno January 4, 2011 Reply

    wht shld i do

  3. i.am.skittles.sksv SkiitZo January 5, 2011 Reply

    I just tried to use these files on my PSP 3001 OFW 6.31 and it doesn’t load the HEN.
    I tried pushing the Select button to see if the VSH menu would appear, but it didn’t.

    Is there something I did wrong by chance?

    • atmaxplorer sylv3rblade January 5, 2011 Reply

      Hmm odd, I tried it with my friend’s PSP and it worked. Hang on, I’ll check the files.

    • atmaxplorer sylv3rblade January 5, 2011 Reply

      retried installing on another PSP and it worked fine. What PSP do you have? Did it revert to the XMB after loading the save game exploit?

  4. sayemahmed1995 dunno January 6, 2011 Reply

    can you send everthing i need to know to my email + download link abot downgrade version 6.31 and hen [email protected]

  5. damjburke Dboy January 6, 2011 Reply

    ok so tried the new hen and as it loads the save game it goes to a black screen where it brings up some information about the patch and then goes to another black screen where it says “WARNING MEMORY LEAK” and back to XMB yet when i press select still nothing.
    What could I be doing wrong?
    Any help?

    • atmaxplorer sylv3rblade January 6, 2011 Reply

      Try checking your system settings to see if your psp has loaded 6.31 Hen.

  6. damjburke Dboy January 6, 2011 Reply

    Ok so it doesnt say 6.31 Hen it says 6.31 PRO which i dont think it did b4. now prometheus loads up and works fine. i tried to put some .iso and .cso on but it cant find them. so maybe i put them in the wrong folder?

    • atmaxplorer sylv3rblade January 6, 2011 Reply

      place them in an ISO folder on your memory stick (if you don’t have one, create it)

  7. hectordavidi wikileaks January 7, 2011 Reply

    hello sylv3rblade, can plase make all in one pack (zip/rar) with the dame demo and everything done. i mean just format memory extract and load. then everything should run and fun. i guess. let me know what u think about it. btw same pack but for 6.35 cya.

    • atmaxplorer sylv3rblade January 7, 2011 Reply

      Great idea. I’ll repack the files into a single download for each of the firmwares for HEN.

      • hectordavidi wikileaks January 7, 2011 Reply

        =] i let me know when its done. btw i try it, but i think i missing something, dunno what but i just tryed twice. no luck, it restart i press select and nothing changed. ummm rare i guess. well =] btw add prometeus iso loaded in repack.

        • atmaxplorer sylv3rblade January 8, 2011

          uploaded and edited the guide.
          I’ll updated the trouble shooting guide as well

  8. damjburke Dboy January 7, 2011 Reply

    Ok so i put them into a created ISO folder. and moved it onto memory stick, but they still dont show up when i open prometheus. i put the ISO folder into a few different folders to see if that would work but they sitll dont show. The ISO’s i put in FF7 Crisis Core and Yu-gi-oh. I have multiple folders that show up on my PSP. I tried to put the ISO folder into PSP/GAME/ folder.

    • atmaxplorer sylv3rblade January 7, 2011 Reply

      The ISO folder should be in X:\ISO where X is your memory stick.
      This means that if you have a game in there, it would read as X:\ISO\somegame.iso
      Also take note that the files in there should be in iso or cso format.

      • damjburke Dboy January 7, 2011 Reply

        Ok awesome. Found the games. Thanks. Problem is now when i go to load them nothing happens. screen goes black and I have to reset and start all over. Sorry to be such a pain but any ideas?

        • go_girl_nadine Nadine January 7, 2011

          omggg its realllly working dudeeeeee i lovee yaa finnaly i can do something with my psp go

        • atmaxplorer sylv3rblade January 7, 2011

          congrats 🙂
          If you can, take a screenshot (via a plugin) of your system software version 🙂

        • go_girl_nadine Nadine January 7, 2011

          i got 6.31 but sorry to say ive tried it but not all the games work why ? i have a game that crash and then the psp turn off why ? its ratchet and clank ? and whats iso mode ? m33 driver ? and the second one ? whats the difference?

        • atmaxplorer sylv3rblade January 8, 2011

          m33 driver is used for older games. The prometheus ISO loader (and all the prometheus modules) are meant to decrypt newer games and seem to have problems with older ones. We can thank sony for that :/

        • go_girl_nadine Nadine January 8, 2011

          oh okay ratchet and clank crash when i open it all other 9 games work .. i aslo get a memory leak but it works like a charm will there be an update to iso loader to run and be compatible with all games ? hmm some of the pictures above is not the same for me i dont get a menu when i click select it says i have 6.31 pro , whats the difference between Install 6.35 Hen + Prometheus ISO loader on your PSP is it updated to fix issues like that ? such as crashes … black screens.. crash when i pause and continue game…

        • go_girl_nadine Nadine January 8, 2011

          have anybody tried it with ratchet and clank size matters ? it seems to not be working ive tried 12 more games and all they work except this ? also will there be an update for promethious iso loader ? where can i find promethious iso loader main page to see the updates ? is there 0.2 ? i have 0.1

        • atmaxplorer sylv3rblade January 9, 2011

          No updates yet, I’ll update the post and do an announcement on the front page for the next release of prometheus.
          For starters however, I’ve listed games compatible and not with the Prometheus ISO loader:
          http://atmaxplorer.com/2011/01/games-compatibile-with-prometheus-iso-loader/

        • go_girl_nadine Nadine January 9, 2011

          okay im waiting for the update sorry im stupid where is the front page ? do you mean that page ?

        • go_girl_nadine Nadine January 9, 2011

          oh hey mercury Confirmed not working with Prometheus ISO loader ?? it worked on my psp go

        • go_girl_nadine Nadine January 9, 2011

          or maybe a similar game 😛

        • atmaxplorer sylv3rblade January 9, 2011

          Front page is on just http://www.atmaxplorer.com 🙂
          Think of it as news update

        • go_girl_nadine Nadine January 9, 2011

          hey i see under the promethious iso loader ratchet and clank ? how are you able to play it ? its not incomptatible with iso loader ?

        • go_girl_nadine Nadine January 9, 2011

          did you use some sort of patch on it ?

        • atmaxplorer sylv3rblade January 9, 2011

          umm it’s under confirmed not working :/

        • go_girl_nadine Nadine January 9, 2011

          i found openidea-iso-loader-0-2 is it safe ? will it brick my psp ?

        • atmaxplorer sylv3rblade January 9, 2011

          Open idea is still a WIP and quite behind Prometheus in terms of compatibility :/

        • go_girl_nadine nadine January 10, 2011

          hmm theres something wrong with you compatibility list please change mercury to working because its confirmed working on my psp go if you want i can make a video 😀 but please as soon as you update promethious iso loader send a message to my email [email protected] and give me the link ..
          much appreciated 😀

        • atmaxplorer sylv3rblade January 10, 2011

          will add it thanks

        • 1jmbpt hinorashi January 15, 2011

          please i cannot find a khbbs.cso file and converting it is way to complicated can you please email it to me it is the only thing i have ever wannted in my life please i beg of you. aqua is so cool i must use her please help me.

        • atmaxplorer sylv3rblade January 15, 2011
      • damjburke Dboy January 7, 2011 Reply

        Got it working. Awesome Thank You. 🙂

        • atmaxplorer sylv3rblade January 7, 2011

          Enjoy 🙂

        • salman20391 alternate_theory January 23, 2011

          have the same memory leak problem.any tips?

  9. sayemahmed1995 dunno January 7, 2011 Reply

    it works can u tell me how to downgrade to a custom firmware

  10. sayemahmed1995 dunno January 7, 2011 Reply

    ive got ofw 6.31

  11. sayemahmed1995 dunno January 7, 2011 Reply

    hbl works

  12. adi_dem84 Adi January 7, 2011 Reply

    sylv3rblade can you pls help me i install all like they say but when i load prometheus i got only black screen am on 6.35PRO 3004 =(

  13. pspnoob pspnoob January 9, 2011 Reply

    Hey… Well my PSP says WARNING LEAK!! and then turns off, it doesn’t revert to XMB… WHY?

  14. adi_dem84 Adi January 9, 2011 Reply

    yes i got it work =) but i have other question now is there any working emulator of PSone or X on PSP with 6.20-6.35 fm?

    • atmaxplorer sylv3rblade January 9, 2011 Reply

      Popsloader. I’ll check if there’s an updated build specifically for 6.xx but till then, check this post out:
      http://atmaxplorer.com/2009/11/install-popsloader-on-your-psp/

      • adi_dem84 Adi January 9, 2011 Reply

        thks for fast replay, i know about popsliader but can not install it ’cause my psp its new model 3004 and cant do custom fw to 5.xxgen am using Homebrew Enabler on 6.35 i can play iso games but cannot psone games =(.
        thanks again for help sylv3rblade

        • atmaxplorer sylv3rblade January 9, 2011

          There’s prolly a dev working on a 6.xx port. I’ll update as soon as a release is out.

        • adi_dem84 Adi January 9, 2011

          a very big thaks ones more, we will wait

        • adi_dem84 Adi January 11, 2011

          the link to 6.31 Hen Complete Pack does not work now =( myb wrong link, does it include now Psone loader in it?

  15. nguyen2007 psp go January 10, 2011 Reply

    work good

  16. ericson1161982 ericson January 10, 2011 Reply

    does this work on psp 3001

  17. atmaxplorer sylv3rblade January 10, 2011 Reply

    I’ve repacked the files to include PSOne loader.

    • adi_dem84 Adi January 10, 2011 Reply

      is this about 6.35?

      • atmaxplorer sylv3rblade January 10, 2011 Reply

        I’ve repacked files for both firmware versions.

        • adi_dem84 Adi January 10, 2011

          aha ok so this means we can play psone games now on 6.35 =) if yes where we can download it =)

        • atmaxplorer sylv3rblade January 10, 2011

          Yes. Just dl the 6.31 Hen pack or the 6.31 Hen Complete pack, extract and copy it over the existing files on your memory stick. You should see the PSloader on your XMB.

        • adi_dem84 Adi January 10, 2011

          hmm =(, i have download this 6.31 Hen Complete pack from above and install it on my psp but nothing hapend i see on my xmb just Prometheus ISO loader, 635 HEN by xxxx and Mina no Sukirri there is no app like PSOne loader, i can start Prometheus ISO loader without problems and Mina no Sukirri but my psp restart if i open this other one “635 HEN by xxxx”

        • atmaxplorer sylv3rblade January 11, 2011

          ah whoops, I think I copied the wrong folder :/ Will do a reset :/

        • atmaxplorer sylv3rblade January 11, 2011

          Ok, reverted. My bad on that one :/ Left the files at home so I really can’t re-upload at the moment

  18. ericson1161982 ericson January 10, 2011 Reply

    i can play iso games now but still when i press select i cant see the menu anyway can we use customized themes also
    thanks and good job!!

    • atmaxplorer sylv3rblade January 11, 2011 Reply

      At the moment no cxmb. Installing older CXMB’s may brick your system :/

  19. plepz farmz January 11, 2011 Reply

    hi sylv3rblade!

    my psp 3001 OFW 6.31 when i launch Mina no Sukirri Demo it says 6.31 PRO.

    is it normal?

    • atmaxplorer sylv3rblade January 11, 2011 Reply

      Yes, hmm I guess I need to edit that bit in the post.

      • plepz farmz January 11, 2011 Reply

        @sylv3blade

        regarding the VSH Menu.

        just like what others concern is. we cant see the VSH Menu or activate it when we press Select.

  20. ericson1161982 ericson January 11, 2011 Reply

    is there any news in unbricking a mobo ta088v3 i sure eant to try this on my other ps but its bricked…

    • atmaxplorer sylv3rblade January 11, 2011 Reply

      still luck with that. However, since the PSP has been fully compromised, someone may be able to make the a Pandora Battery to revive currently unhackable models.

  21. adi_dem84 Adi January 11, 2011 Reply

    the link to 6.31 Hen Complete Pack does not work now =( myb wrong link, does it include now Psone loader in it.?

    • atmaxplorer sylv3rblade January 11, 2011 Reply

      looks like uploading.com has issues again :/ Nope, there was a problem with the file and the PS One loader I included didn’t work so I reverted to the old file.

    • atmaxplorer sylv3rblade January 11, 2011 Reply

      files are back up

      • anperez1428 tenshi January 24, 2011 Reply

        is the psone loader ok now??

  22. ericson1161982 ericson January 12, 2011 Reply

    well who ever that somegne making the unbricker is!!god speed bro and may the force be with yaaa
    hey sylv3rblade any ideas why the vsh menu not showing on our psp my cfw version is 6.31PRO

    • atmaxplorer sylv3rblade January 12, 2011 Reply

      Probably some incompatible libraries. Someone pushed a patch that fixed up the 6.35 release though :/

  23. atmaxplorer sylv3rblade January 12, 2011 Reply

    added mirror to all files :/
    uploading.com is giving me a headache :/

  24. skate_revolver08 erck January 15, 2011 Reply

    pls help me where to put games in prometheus i cant edit the folder to xd:\ISO how to put that special character into a folder email me

    • atmaxplorer sylv3rblade January 15, 2011 Reply

      dude, the folder name is simply ISO.
      Download and take a look at the complete pack’s contents.

      • vanz_paltog banban January 20, 2011 Reply

        thank you sylv3rblade…..

        it works…. i upgrade my OFW from 6.20 to 6.31…..

        and follow the steps you posted….

        yeah…. i need another stick for all of my games… yeah… hahaha…

        thanks a lot syl….more powers

        • atmaxplorer sylv3rblade January 20, 2011

          Not a prob. Just a reminder, development on the 6.31 seems to be dead so in the future, the likeliest course is to upgrade to 6.35 :). For now, have fun with your new cfw.

        • vanz_paltog banban January 22, 2011

          oh my gawd…… ok… got to upload 6.35……. haha… thank again.

  25. vanz_paltog banban January 22, 2011 Reply

    downloada i mean….

    effect of excitedness.. haha

  26. cjdrabe cj January 23, 2011 Reply

    i have a psp go v5.7 how can i upgrade it to 6.31?

    • atmaxplorer sylv3rblade January 23, 2011 Reply

      Hi cj, I would suggest upgrading to 6.35 as it’s development is still on-going (6.31’s development has stopped in favor of 6.35). Follow this guide here.

      • cjdrabe cj January 24, 2011 Reply

        i dont know how to convert it to 6.35 specialy when sony brought out the new update 6.37.. i was afraid that i might upgrade it to 6.37 instead of 6.35

        • atmaxplorer sylv3rblade January 24, 2011

          don’t worry, the guide I linked you to teaches you how to upgrade to 6.35 specifically. The only way you might update to 6.37 is by using the Network Update.

        • atmaxplorer sylv3rblade January 24, 2011

          also, I’ve updated the guide on this post so you can update to 6.31 if you choose that over 6.35 🙂

        • cjdrabe cj January 24, 2011

          silv3rblade,
          i just want to thank you for the guide and help.. i’ve done it and worked smoothly.. keep up your humble deeds.. and stay that way!

        • atmaxplorer sylv3rblade January 24, 2011

          NP 🙂 If you get the chance, spread a link to this post 🙂

          Enjoy your newly hacked PSP.

  27. kakashi.mike101 mkg January 25, 2011 Reply

    does this work for the psp w/ ratchet and thing 3001 someone says it doesnt?

  28. mark_labuga mark pogi February 12, 2011 Reply

    i have a problem…so my psp usually load the HEN 15 TIMES!!!…and then, when i start the game, it just stays in black screen..i don’t know why..then it freezes. then restart.then LOAD the HEN again..i follow the emergency steps you shown on your blog..i reformat it..
    then nothin works…can you plz help me??..^_^

    • atmaxplorer sylv3rblade February 12, 2011 Reply

      What’s your current firmware version and PSP model?
      It might be incompatibilities with the memory stick as the good old chickHen hack had this problem as well.

  29. amir.tcsc Critical February 13, 2011 Reply

    hi, i have a question a bout psp mobo and lcd!
    i wanna know if its posible to use a lcd of psp-2000 with TA 88-V3 ON TA 85-v2?
    and also is there any way to play newer game (for example GOW:ghost of sparta) on 5.00m33 or 5.5 gen-d3? if there is, can u link me the programs? tnx

  30. amir.tcsc Critical February 13, 2011 Reply

    i’ve forgot to ask this, is there any newer full cfw like 5.00m33 or 5.5gen-d3?

    and also a bout my prv question… as u know both of TA-85-V2 AND TA-88-V3 are psp-2000 but , there are difrent on region, the first one is japan region (psp-2000) and the non-hackeble one is psp-2006

    • atmaxplorer sylv3rblade February 13, 2011 Reply

      Currently yes, there is one in development by Neur0n. It’s made specifically for hackable PSP-2000s (not sure if it works with Phats since there’s some features specifically for the slim)

  31. marune_j12 flyleaf February 14, 2011 Reply

    hey! Its working, but when i try to open minna no sukkiri, it goes black screen, then starting hbl,then shut down! My psp is 2003 slim fw 6.31! Thanks

  32. marune_j12 flyleaf February 14, 2011 Reply

    what is homebrew loader? because you said that Signed 6.31 Hen PRO does not include HBL (Homebrew Loader)? Thanks

  33. marune_j12 flyleaf February 15, 2011 Reply

    and everytime i play games, it freezes? How do i fix that? And how to hack psp slim 2003 fw 6.31? or upgrade to 6.35 Pro? Thanks

  34. marune_j12 flyleaf February 15, 2011 Reply

    is it okay if i switch to m33 drive?

  35. marune_j12 flyleaf February 16, 2011 Reply

    hey i format my memory stick and restore my psp, and then follow again this guide, but the problem is, when i run minna no sukkiri, it freezes in WARNING MEMORY LEAK ms:0/………. and then shut down.

  36. qmamaz Momo February 17, 2011 Reply

    What i Try to run Bleach Heat of the sould 7 the screen turns black and nothing happens. what should i do?

  37. p.sheldon01 Phil February 27, 2011 Reply

    Thanks for the Guide, sylv3rblade, however I’m still having problems:

    PSP Go – 6.31
    I can’t get the Hen menu to open. Also, when I try to run the Prometheus ISO Loader, I get the following message: “This game cannot be started. The data is corrupted.”

    When I ran the install from the save data for Mina no Sukkiri, I was not reverted to XMB. Instead, my PSP Go went to sleep.

    I used your 6.31 Hen Complete Pack along with http://www.psp-hacks.com/file/2045 (the link you provided for the PSP Go‘s Light VSH menu was inactive).

    Inside of x:\ I have all the default files, as well as:
    -DL from AtmaXplorer.com.txt
    -h.bin
    -hbl\
    -ISO\
    -plugins\

    Inside of x:\PSP\GAME\
    -NPJG90047\
    -Prometheus_Iso_loader\

    Inside of x:\PSP\SAVEDATA\
    -UCJS10094\

    Thanks Again

  38. shr3jn Shreejan March 29, 2011 Reply

    I have a PSP GO running 6.31 firmware. I followed all o your above steps and ran prometheus iso loader. Then i downloaded avatar game. When i opened it using prometheus iso loader the game didn’t run? is the game not supported or anything else?

  39. hiren.keepsmiling HirenBP April 26, 2011 Reply

    Hi, I’ve upgraded my psp form 6.20 to 6.31 everything woks fine. Just having trouble with some games (carzy taxi fare wars, and medal of honor heroes 2). Any Ideas what I can do about that.
    Would Really appreciate help
    Thank You.

  40. kerilou Zane April 29, 2011 Reply

    Hi, I just downloaded this and everything worked fine untill I brought up the select screen. Instead of what came up on the picture, the CPU Clock XMB and CPU Clock Game show DEFAULT next to them instead of the numbers in the picture and the next 4 underneath that all say “DISABLED” instead of “ENABLED”. Do you know what I can do to correct this?

    • atmaxplorer sylv3rblade April 29, 2011 Reply

      Leave the options as is. They’re default.

      • kerilou Zane April 29, 2011 Reply

        Thanks for the quick reply, turns out the problem I had was that I forgot to load games on in the first place, thanks a lot man, you were a great help

  41. nikkie_nicks.cute nixx22 May 5, 2011 Reply

    hi sylv3rblade can u help me bcoz this my 1st tym to update my psp. i try to update it using system update via wifi so i successfully download and installed 6.38 to my psp but the problem is my games are gone but when i plug to the pc my games are still on my psp. what will i do to back it into normal? i hope u will reply to me and i hope u can help me thanks in advance

    • atmaxplorer sylv3rblade May 5, 2011 Reply

      There is currently no public exploit that’ll allow you to downgrade from 6.38 or install Hen to run your games on it. However if your PSP is hackable, you can use a Pandora Battery to downgrade it. Check this guide here: http://atmaxplorer.com/2009/03/how-to-check-if-your-psp-can-have-cfw-installed/

      • nikkie_nicks.cute nixx22 May 5, 2011 Reply

        but i dnt have pandora battery

      • nikkie_nicks.cute nixx22 May 5, 2011 Reply

        and what do u men by xmb?

        • atmaxplorer sylv3rblade May 5, 2011

          the XMB is the menu of your PSP. As for the Pandora battery issue, I suggest subscribing to our feeds and wait for Total_Noob’s release of a Hen for 6.38.

  42. nikkie_nicks.cute nixx22 May 5, 2011 Reply

    when u will release that?

  43. nikkie_nicks.cute nixx22 May 6, 2011 Reply

    i hope u release hen for 6.38 soon

  44. appu.sp777 appuzz May 6, 2011 Reply

    Hey, i am highly impressed abt ur work
    just wanted to know if there are any “IR Shells” available for firmware 6.31 pro?
    and which is the best firmware for a psp?
    i also would appreciate it if u could sent me the link for 6.31 downgrader…. 😉

  45. appu.sp777 appuzz May 8, 2011 Reply

    would u like to have dinner with me?

  46. presario76 game genie June 11, 2011 Reply

    thanks alot, this works perfectly and i was told it wouldnt be possible

  47. devilsfaithxx arkel September 20, 2011 Reply

    i extracted the hen 6.31. where to put the EBOOT.PBP ?

    • atmaxplorer sylv3rblade September 20, 2011 Reply

      Please read the post, it says: Copy it’s contents directly onto your PSP

  48. jimasaras Jimas January 11, 2012 Reply

    Help!while i was playing a game suddenly the psp shut down and then when i switched it on every time i open the photo file the screen freeze for some seconds and then is shuts down.i cant play any game if i try to, a messege says “The game cannot be started.The data is corrupted” comes out.i had the same problem once before but i put my memory stick to my friends psp then when i put it again in my psp i went to the photo file and the system restarted then i could use prometheus 5.03.
    can someone please help!!!!!!!

  49. jimasaras Jimas January 11, 2012 Reply

    the man who hacked my psp 1000 said that i have to go to the photo file then the psp will restart and i can run prometheus 5.03 then the iso games

Leave a Reply to sylv3rbladeCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

website stats