Comments on: Install Custom Firmware Enabler via ChickHEN R2

By: sylv3rblade

sylv3rblade — Thu, 11 Mar 2010 20:52:18 +0000

You can follow this guide to install a permanent CFW on your PSP provided that you’re sure it’s not a TA-088v3 mobo:
http://www.atmaxplorer.com/2009/07/convert-your-psp-to-custom-firmware-without-pandora-battery/

By: PsP

PsP — Thu, 11 Mar 2010 15:20:25 +0000

can i modify my psp without Pandora battery when it is version 3.80…. and can i play downloaded games just by using chicken r2….pls ans tis as soon as possible cuz ive bought my psp for a long time and it is not modify

By: sylv3rblade

sylv3rblade — Sat, 06 Mar 2010 06:57:17 +0000

Nope. Basta lumampas ng 5.03 wala pang pedeng gawin dyan.

By: ralf

ralf — Fri, 05 Mar 2010 09:08:47 +0000

hi, my psp model is psp3004 firmware 5.70 pwede po bang ma hack ito?

By: MARCUS ALFORD

MARCUS ALFORD — Thu, 25 Feb 2010 23:54:57 +0000

Cheers for that! I’ll give it a go!

Still would like to know what flash does. I guess a guide for the “Flash and Start” would still be helpful.

By: sylv3rblade

sylv3rblade — Tue, 23 Feb 2010 20:16:58 +0000

You can install CFWE 3.7 directly. No need to install 3.51

By: MARCUS ALFORD

MARCUS ALFORD — Tue, 23 Feb 2010 13:07:51 +0000

For example: it says to choose “install”, bu there is no “install” only “Flash and Start”. Not real sure what flash does. Some more info would be helpful

I guess i don’t need the CFWE3.51 before installing CFWE3.7

I have no CFWE installed yet.

Thanks again,
Marcus

By: MARCUS ALFORD

MARCUS ALFORD — Tue, 23 Feb 2010 13:02:39 +0000

So… are there any detaailed instructions for installing CFWE3.7? I would like to know them in detail before i go ahead and install it without any kind of support. Can someone help? I have done the chickhenR2 install already.

Thanks,
Marcus

By: sylv3rblade

sylv3rblade — Thu, 18 Feb 2010 21:16:53 +0000

1.) *sigh* eto ung pic na makikita mo if sinundan mo ung link sa unang reply ko. So no... hanggang 5.03 GEN-C ka lang. 2.) No. For fully hackable PSPs and 5.00 M33-6. Hanggang 5.03 GEN-C lang talaga.

By: JR

JR — Thu, 18 Feb 2010 11:17:49 +0000

Sir ulitin ko yong tanong ko official firmware ko dati 4.21 TA-90v2 pina update ko sa ofw 5.03
ang tanong ko ay ganito

1. meron pa bang tataas na sa cfw 5.03 Gen-C b na pwede kong ilagay na hindi mag bibrick yong PSP ko? anong cfw ito?

2. pwede ba akong maglagay ng cfw 5.00 m33-6 based sa specs ng PSP ko ?

salamat po asahan ko mga sagot nyo

By: GiZmO

GiZmO — Thu, 18 Feb 2010 00:35:38 +0000

Good day po!
meron na po bang pang downgrade ng 6.20 firmware?
ang unit ko po e PSP 3006.
salamat po.

By: JR

JR — Thu, 18 Feb 2010 00:14:00 +0000

TA-90v2 po

By: sylv3rblade

sylv3rblade — Wed, 17 Feb 2010 20:13:18 +0000

1.) Check mo muna kung anong mobo ng PSP mo kasi if partially hackable lang sya, ang pinaka mataas na cfw na pede sa kanya is 5.03 GEN-C. You can check the mobo by following the instructions posted here:
http://www.atmaxplorer.com/2009/03/how-to-check-if-your-psp-can-have-cfw-installed/
2.) Kapag fully hackable ang PSP mo pede mo iinstall ang 5.00 M33-6 or even 5.50 GEN-D3

By: JR

JR — Wed, 17 Feb 2010 12:19:53 +0000

Sir official firmware ko date 4.21 pina update ko sa 5.03 tapos ang cfw 5.03 gen-c ( MHU )

ang tanong ko ay ganito

1. meron pa bang tataas na cfw ang pwede kong ilagay na hindi mag bibrick yong PSP ko? anong cfw ito?

2. pwede ba akong maglagay ng cfw 5.00 m33-6 based sa specs ng PSP ko ?

salamat p[o asahan ko mga sagot nyo

By: Red

Red — Wed, 27 Jan 2010 21:09:51 +0000

d kasi me marunong mag tagalog

can the PSP 1000 run the Tekken 6 game? or you still need to update it…